Section one: Contracting authority
one.1) Name and addresses
South Lanarkshire Council
Council HQ
Hamilton
ML3 0AA
Contact
Peter Cannon
Peter.cannon@southlanarkshire.gov.uk
Country
United Kingdom
NUTS code
UKM95 - South Lanarkshire
Internet address(es)
Main address
http://www.southlanarkshire.gov.uk
Buyer's address
https://www.publiccontractsscotland.gov.uk/search/Search_AuthProfile.aspx?ID=AA00410
one.2) Information about joint procurement
The contract is awarded by a central purchasing body
one.3) Communication
The procurement documents are available for unrestricted and full direct access, free of charge, at
www.publictendersscotland.publiccontractsscotland.gov.uk
Additional information can be obtained from the above-mentioned address
Tenders or requests to participate must be submitted electronically via
www.publictendersscotland.publiccontractsscotland.gov.uk
one.4) Type of the contracting authority
Regional or local authority
one.5) Main activity
General public services
Section two: Object
two.1) Scope of the procurement
two.1.1) Title
Industrial Cleaning, Pest Control and Other Environmental Services
Reference number
SLC/PS/COMENT/22/154
two.1.2) Main CPV code
- 90922000 - Pest-control services
two.1.3) Type of contract
Services
two.1.4) Short description
The Council has an ongoing requirement for Industrial Cleaning, Pest Control and Other Environmental Services for use by South Lanarkshire Council Environmental Services. The Contract will cover a range of services as follows:
- Rats and Mice Treatment and Eradication
- Treatment of Rodents in Sewers
- Wasps/Bees Nests Treatment and Eradication
- Treatment and Eradication of Grey Squirrels
- Provision of Pest Control Services at Council Properties
- Treatment and Eradication of Insects
- Removal of Body Fluids and Tissue
- Cleaning and Disinfection of “Dirty Houses”
- Proofing of Buildings/Structures Against the Ingress of Birds and the Installation of Approved Bird Deterrent Measures
- Cleaning and Disinfection of Water Supply Systems
The Contract will be split into Lots as follows:
Lot 1: Industrial Cleaning and other Environmental Services
- Removal of Body Fluids and Tissue
- Cleaning and Disinfection of “Dirty Houses”
- Cleaning and Disinfection of Water Supply Systems
- Removal of garden waste
Lot 2: Pest Control
- Rats and Mice Treatment and Eradication
- Treatment of Rodents in Sewers
- Wasps/Bees Nests Treatment and Eradication
- Treatment and Eradication of Grey Squirrels
- Provision of Pest Control Services at Council Properties
- Treatment and Eradication of Insects
- Proofing of Buildings/Structures Against the Ingress of Birds and the Installation of Approved Bird Deterrent Measures
The Contract will be awarded via open procedure on a single supplier basis per Lot where acceptable bids are received on the basis of the most economically advantageous tender (MEAT). Bidders will have the opportunity to bid for one or both Lots. The weightings associated with the award of the contract are as follows;
30% Technical
70% Commercial
The contract will be for a period of 2 years with the option to extend for a further period of up to 24 months with the anticipated contract start date being 01 October 2023.
two.1.5) Estimated total value
Value excluding VAT: £4,000,000
two.1.6) Information about lots
This contract is divided into lots: Yes
Tenders may be submitted for all lots
Maximum number of lots that may be awarded to one tenderer: 2
The contracting authority reserves the right to award contracts combining the following lots or groups of lots:
The Contract will be awarded on a single supplier basis per Lot where acceptable bids are received on the basis of the most economically advantageous tender (MEAT). Bidders will have the opportunity to bid for one or both Lots.
two.2) Description
two.2.1) Title
Pest Control Services
Lot No
2
two.2.2) Additional CPV code(s)
- 90922000 - Pest-control services
two.2.3) Place of performance
NUTS codes
- UKM95 - South Lanarkshire
two.2.4) Description of the procurement
Lot 2: Pest Control
- Rats and Mice Treatment and Eradication
- Treatment of Rodents in Sewers
- Wasps/Bees Nests Treatment and Eradication
- Treatment and Eradication of Grey Squirrels
- Provision of Pest Control Services at Council Properties
- Treatment and Eradication of Insects
- Proofing of Buildings/Structures Against the Ingress of Birds and the Installation of Approved Bird Deterrent Measures
The Contract will be awarded via open procedure on a single supplier basis per Lot where acceptable bids are received on the basis of the most economically advantageous tender (MEAT). Bidders will have the opportunity to bid for one or both Lots.
two.2.5) Award criteria
Quality criterion - Name: Technical / Weighting: 30
Price - Weighting: 70
two.2.6) Estimated value
Value excluding VAT: £1,000,000
two.2.7) Duration of the contract, framework agreement or dynamic purchasing system
Duration in months
24
This contract is subject to renewal
Yes
Description of renewals
Option to extend for a further period of up to 24 months
two.2.10) Information about variants
Variants will be accepted: No
two.2.11) Information about options
Options: No
two.2.13) Information about European Union Funds
The procurement is related to a project and/or programme financed by European Union funds: No
two.2) Description
two.2.1) Title
Industrial Cleaning and other Environmental Services
Lot No
1
two.2.2) Additional CPV code(s)
- 90910000 - Cleaning services
- 90911100 - Accommodation cleaning services
- 90913100 - Tank-cleaning services
two.2.3) Place of performance
NUTS codes
- UKM95 - South Lanarkshire
two.2.4) Description of the procurement
Lot 1: Industrial Cleaning and other Environmental Services
- Removal of Body Fluids and Tissue
- Cleaning and Disinfection of “Dirty Houses”
- Removal of garden waste
The Contract will be awarded via open procedure on a single supplier basis per Lot where acceptable bids are received on the basis of the most economically advantageous tender (MEAT). Bidders will have the opportunity to bid for one or both Lots.
two.2.5) Award criteria
Quality criterion - Name: Technical / Weighting: 30
Price - Weighting: 70
two.2.6) Estimated value
Value excluding VAT: £3,000,000
two.2.7) Duration of the contract, framework agreement or dynamic purchasing system
Duration in months
24
This contract is subject to renewal
Yes
Description of renewals
Ooption to extend for a further period of up to 24 months
two.2.10) Information about variants
Variants will be accepted: No
two.2.11) Information about options
Options: No
two.2.13) Information about European Union Funds
The procurement is related to a project and/or programme financed by European Union funds: No
Section three. Legal, economic, financial and technical information
three.1) Conditions for participation
three.1.1) Suitability to pursue the professional activity, including requirements relating to enrolment on professional or trade registers
List and brief description of conditions
There are a number of questions/statements that have been included in the Contract Notice and within the Qualification Envelope which detail the minimum requirements that Bidders must be able to evidence for participation in this tender and ultimately will be required to evidence prior to any award being made. There are in addition further statements made that simply provide relevant information relating to the tender itself.
These questions and statements form an integral part of the Single Procurement Document (the SPD) which the Council has decided to implement for all tenders in excess of 50000GBP in value.
SPD Question 2A.18 Lots
This tender is split into the following Lots:
Lot 1 – Industrial Cleaning and other Environmental Services
Lot 2 – Pest Control
Bidders may submit a tender for one, several or all lots. The maximum number of lots that may be awarded to one bidder is 2.
SPD Question 2.C.1 Reliance on the capacities of other entities
Bidders are required to complete a full SPD for each of the entities whose capacity they rely upon
SPD Question 2.D.1 Subcontractors on whose capacity the bidder does not rely
Bidders are required to complete a shortened version of the SPD for each Subcontractor on whose capacity the bidder does not rely on.
Exclusion Criteria
Economic operators may be excluded from this competition if they are in any of the situations referred to in regulation 58 of the Public Contracts (Scotland) Regulations 2015.
SPD Questions 3A – 3C have been identified as mandatory exclusion grounds and SPD Questions 3D have been identified as discretionary exclusion grounds. All the exclusion grounds will be assessed on a PASS/FAIL basis. For the mandatory exclusion grounds a bid will be excluded where the bidder fails to provide either a positive response or to provide details to the satisfaction of the Council of the self cleansing measures undertaken. .For the discretionary exclusion grounds a bid may be excluded where the bidder fails to provide either a positive response or if the Council is not satisfied as to the self cleansing measures undertaken.
SPD Question 4A.1 Trade Registers
It is a requirement of this tender that if the bidder is UK based they must hold a valid registration with Companies House. Where the bidder is UK based but not registered at Companies House they must be able to verify to the Councils satisfaction that they are trading from the address provided in the tender and under the company name given.
If the bidder is based out-with the UK they must be enrolled in the relevant professional or trade register appropriate to their country as described in Schedule 5 of the Public Contracts (Scotland) Regulations 2015.
SPD Question 4A.2 Authorisation/Membership
Where it is required, within a bidder’s country of establishment they must confirm which authorisation or memberships of the relevant organisation(s) are required in order to perform this service.
Bidders must confirm if they hold the particular authorisation or memberships.
three.1.2) Economic and financial standing
Minimum level(s) of standards possibly required
SPD Question 4B.4 Economic and Financial Standing
The Council will use the following ratios to evaluate a bidders financial status:
Profitability – this is taken as profit after tax but before dividends and minority interests. If a company makes a profit then it is a pass for this ratio;
Liquidity – this is calculated as current assets less stock and work in progress, divided by current liabilities. If the answer is greater than or equal to one then it is a pass for this ratio
Gearing – this is calculated as the total external secured borrowing (short term and long term) divided by shareholder funds expressed as a percentage. If the answer is less than or equal to 100% it is considered a pass for this ratio.
Bidders must provide the name and value of each of the 3 ratios within their response to SPD question 4B.4.
The Council requires bidders to pass 2 out of the 3 financial ratios above.
Where 2 out of the 3 ratios cannot be met, the Council may take the undernoted into consideration when assessing financial viability and the risk to the Council, providing that the Bidder can supply evidence to substantiate any of the mitigating criteria when requested to do so. The following list is not exhaustive and other criteria may be considered where proposed by a bidder as mitigating factors:
Would the bidder have passed the checks if prior year accounts had been used?
Were any of the poor appraisal outcomes "marginal"?
Does the bidder operate in a market which, traditionally, requires lower liquidity or higher debt finance?
Does the bidder have sufficient reserves to sustain losses for a number of years?
Does the bidder have a healthy cashflow?
Is the bidder profitable enough to finance the interest on its debt?
Is most of the bidder's debt owed to group companies?
Is the bidder's debt due to be repaid over a number of years, and affordable?
Have the bidder's results been adversely affected by "one off costs" and / or "one off accounting treatments"?
Do the bidder's auditors (where applicable) consider it to be a "going concern"?
Will the bidder provide a Parent Company Guarantee?
Is the bidder the single supplier/source of the Goods/Works/Services in the marketplace?
The Council will request submission of and assess the bidders financial accounts, and may use financial verification systems to validate the information provided.
SPD Question 4B.5 Insurance
The bidder must confirm that they have or will commit to obtain prior to the commencement of the contract, the following levels of Insurance Cover:
Employer’s Liability Insurance covering the death of or bodily injuries to employees of the bidder arising out of and in the course of their employment in connection with this contract to the level of 10000000 GBP in respect of each claim, without limit to the number of claims.
Public Liability Insurance covering the death of or bodily injury to a person (not an employee of the bidder) or loss of or damage to property resulting from an action or failure to take action by the bidder to the level of 5000000 GBP in respect of each claim, without limit to the number of claims.
three.1.3) Technical and professional ability
Minimum level(s) of standards possibly required
SPD Question 4C.1.2 Technical and Professional Ability
With reference to the nature and details of the supplies/services that are the subject matter of this tender, relevant examples are to be provided of the supplies/services undertaken. It is a requirement of this tender that the Bidder can demonstrate in their response to question 4C1.2 that they have carried out services of a similar type and value to those mentioned in the service requirements for the lot(s) they have bid for, in the last 3 years
SPD Question 4C.6 Technical and Professional Ability (Qualifications)
The bidder as a company will hold the following educational or professional qualifications:
- Membership with the British Pest Control Association (BPCA) or equivalent (Lot 2 only)
- Goods Vehicle Operators Licence.
- Waste Carrier Licence
Bidders should confirm below whether or not they can evidence this requirement by stating Yes or No in the text response field provided.
SPD Question 4C.9 Technical and Professional Ability (Equipment)
Please provide details of the relevant tools, plant or technical equipment available to you in relation to this procurement exercise. As a minimum the bidder will have access to all required tools and equipment available to carry out all services for the lot(s) they have bid for as detailed in the service requirements at the commencement of the contract.
SPD Question 4C.10 Technical and Professional Ability (Sub-Contracting
Bidders will be required to confirm whether they intend to subcontract and, if so, for what proportion of the contract.
SPD Question 4D.1 Quality Assurance Schemes
It is a mandatory requirement of this tender that bidders meet the following environmental standard(s)/accreditation(s);
ISO 9001 Quality Management System (or equivalent)
Bidders should refer to Attachment 10 which provides details of Quality Assurance Requirements
A Health and Safety Questionnaire is available in the attachment area. The Bidder recommended for award will be required to provide a completed copy of this document when requested.
SPD Question 4D.2 Environmental Management Standards
It is a requirement of this tender that Bidders recommended for award meet the following Quality Assurance Scheme Membership;
ISO14001 Environmental Management Systems (or equivalent)
Bidders should refer to Attachment 9 which provides details of Environmental Management Standard Requirements.
Section four. Procedure
four.1) Description
four.1.1) Type of procedure
Open procedure
four.1.8) Information about the Government Procurement Agreement (GPA)
The procurement is covered by the Government Procurement Agreement: Yes
four.2) Administrative information
four.2.1) Previous publication concerning this procedure
Notice number: 2023/S 000-014469
four.2.2) Time limit for receipt of tenders or requests to participate
Date
1 September 2023
Local time
12:00pm
four.2.4) Languages in which tenders or requests to participate may be submitted
English
four.2.6) Minimum time frame during which the tenderer must maintain the tender
Duration in months: 6 (from the date stated for receipt of tender)
four.2.7) Conditions for opening of tenders
Date
1 September 2023
Local time
12:00pm
Section six. Complementary information
six.1) Information about recurrence
This is a recurrent procurement: No
six.3) Additional information
Declarations and Certificates
In an open tendering procedure prior to any award being made the successful bidder will provide the undernoted certificates, declarations and/or completed questionnaires to evidence their compliance with the relevant questions within the Qualification Envelope.
All certificates, declarations and questionnaires can be found within the Attachment area of PCS-T.
ESPD Question 2D.1 Prompt Payment Certificate
ESPD Question 3D.3 Human Rights Act Declaration
Declaration Section Form of Tender
ESPD Question 3D.11 Non-Collusion Certificate
ESPD Question 4D.1 Health and Safety Questionnaire
ESPD Question 4B.5.1 Insurance Certificates
ESPD Questions 3A.1 to 3A.8 Serious and Organised Crime Declaration
ESPD Question 3A.6 Modern Slavery Act 2015 Declaration
*The ‘Form of Offer to Tender’ must be completed and uploaded within the relevant question in the Commercial Envelope.
In the case of an open tender, the other Declarations listed above will not be required to be uploaded and submitted with the bid, but will instead be requested by the Council following the conclusion of the evaluation of the Qualification, Technical and Commercial Envelopes and prior to the award of the tender.
Failure to provide this information or in the event that the information provided does not support or evidence the statements made within the SPD will invalidate the bid. In this scenario the Council will seek to obtain the relevant information and evidence from the second highest scoring bidder and so on until a fully compliant bidder is identified.
The buyer is using PCS-Tender to conduct this ITT exercise. The Project code is 24577. For more information see: http://www.publiccontractsscotland.gov.uk/info/InfoCentre.aspx?ID=2343
A sub-contract clause has been included in this contract. For more information see: http://www.publiccontractsscotland.gov.uk/info/InfoCentre.aspx?ID=2363
Community benefits are included in this requirement. For more information see: https://www.gov.scot/policies/public-sector-procurement/community-benefits-in-procurement/
A summary of the expected community benefits has been provided as follows:
As detailed in the tender documents
(SC Ref:740459)
six.4) Procedures for review
six.4.1) Review body
Hamilton Sheriff Court
Sheriff Court House, 4 Beckford Street,
Hamilton
ML3 0BT
hamiltoncivl@scotcourts.gov.uk
Telephone
+44 1698282957
Country
United Kingdom
Internet address
six.4.3) Review procedure
Precise information on deadline(s) for review procedures
Court of Session
Parliament House
Parliament Square
Edinburgh
EH1 1RQ
+44 1312252595