Section one: Contracting authority
one.1) Name and addresses
Museum of London
150, London Wall
London
EC2Y 5HN
Contact
Owen Mills
procurement@museumoflondon.org.uk
Telephone
+44 3335661983
Country
United Kingdom
NUTS code
UKI31 - Camden and City of London
Internet address(es)
Main address
one.3) Communication
The procurement documents are available for unrestricted and full direct access, free of charge, at
https://www.delta-esourcing.com/tenders/UK-UK-London:-Museum-construction-work./H87YX2N3X3
Additional information can be obtained from the above-mentioned address
Tenders or requests to participate must be submitted to the above-mentioned address
one.4) Type of the contracting authority
Body governed by public law
one.5) Main activity
Recreation, culture and religion
Section two: Object
two.1) Scope of the procurement
two.1.1) Title
New Museum Project - Trade Package: Partitions, Drylining and Ceilings (General Market)
Reference number
TP7050GM
two.1.2) Main CPV code
- 45212313 - Museum construction work
two.1.3) Type of contract
Works
two.1.4) Short description
The Museum of London is looking to procure a contract to provide partitioning, drylining and ceiling works to the General Market as part of its New Museum Project at West Smithfield working under its appointed Construction Manager. Further detail relating to the expected scope of works is included later in this notice.
two.1.5) Estimated total value
Value excluding VAT: £4,000,000
two.1.6) Information about lots
This contract is divided into lots: No
two.2) Description
two.2.2) Additional CPV code(s)
- 45421141 - Installation of partitioning
- 45421152 - Installation of partition walls
- 45421146 - Installation of suspended ceilings
- 45324000 - Plasterboard works
two.2.3) Place of performance
NUTS codes
- UKI31 - Camden and City of London
Main site or place of performance
Camden and City of London
two.2.4) Description of the procurement
These Trade Contract Works shall comprise the planning, sequencing, management, Trade-Contractor Design including connections, coordination, project specific method statements, technical submittals, surveys, risk assessments, procurement, manufacturing, delivery, offloading, storage, distribution, setting out, positioning, installing, and handover of the complete Drylining, partitions and ceilings including, but not limited to:
1.Provision to allow installation of flush skirting with shadow gap beads to be incorporated into fire / acoustic rated partitions.
2.Angle reinforcements behind boards at re-entrant corners.
3.Install fire / acoustic seals.
4.Allow for DPC installation under partitions according to construction information.
5.Cavity insulation
6.Structural movement joints
7.Sealant: Gyproc FireStrip, soft extruded intumescent gap sealer
8.Continuous beads of acoustic sealant, fire rated where required, around the perimeter of the framing or to the outer edges of the board, ensuring all air paths are sealed.
9.In shaft walls the core board is to be bedded onto continuous beads of fire rated sealant and board joints of the outer layer to be sealed to the inner layer with continuous beads of fire rated sealant.
10.Removal of any COSHH waste.
11.All access for the works.
12.All horizontal movement of materials.
13.Comply with required recycled content.
14.Making good around cut-outs made by MEPH contractors.
15.Strengthening studs around door openings and wherever necessary.
16.Form box outs around building services.
17.Construct all necessary bulkheads in all types of ceilings.
18.Form openings in both partitions and suspended ceilings for access panels, grilles and the like including any structural supports that may be required.
19.Form all necessary openings for building services penetrations (e.g. pipework, ductwork, cables etc.) including all necessary secondary steelwork/support work.
20.Provide and install all necessary structural support, noggins and pattresses within the stud partitions and ceilings to support building services, fixtures, fittings and signage.
21.Make good using acoustic and/or fire stopping around service penetrations and at interfaces with other elements up to 150mm in width.
22.All insulation to ensure the fire and acoustic performance is achieved in line with the specifications.
23.All abutments, angles, junctions, and fair ends.
24.All acoustic and non-acoustic deflection head details.
25.Allowing for reduced stud centres where required.
and other items and described in the Procurement Documents
two.2.5) Award criteria
Price is not the only award criterion and all criteria are stated only in the procurement documents
two.2.6) Estimated value
Value excluding VAT: £4,000,000
two.2.7) Duration of the contract, framework agreement or dynamic purchasing system
Start date
13 September 2023
End date
27 September 2024
This contract is subject to renewal
No
two.2.10) Information about variants
Variants will be accepted: No
two.2.11) Information about options
Options: Yes
Description of options
The Museum of London reserves the right to use sectional completion and/or other methods whereby services may be called off in sections dependent on the needs to the project and overall programme.
two.2.13) Information about European Union Funds
The procurement is related to a project and/or programme financed by European Union funds: No
two.2.14) Additional information
Procurement Documents will be available upon registration of interest. Information as listed on the 'Tender Document Manifest' will only be provided upon the receipt of a signed NDA, submitted via Delta by the 14th July, 2023. Site Visits are likely to be held on the week commencing the 10th July 2023.
Section three. Legal, economic, financial and technical information
three.1) Conditions for participation
three.1.1) Suitability to pursue the professional activity, including requirements relating to enrolment on professional or trade registers
List and brief description of conditions
Please see Procurement Documents.
three.1.2) Economic and financial standing
Selection criteria as stated in the procurement documents
three.1.3) Technical and professional ability
Selection criteria as stated in the procurement documents
Section four. Procedure
four.1) Description
four.1.1) Type of procedure
Open procedure
four.1.8) Information about the Government Procurement Agreement (GPA)
The procurement is covered by the Government Procurement Agreement: No
four.2) Administrative information
four.2.2) Time limit for receipt of tenders or requests to participate
Date
4 August 2023
Local time
12:00pm
four.2.4) Languages in which tenders or requests to participate may be submitted
English
four.2.6) Minimum time frame during which the tenderer must maintain the tender
Duration in months: 6 (from the date stated for receipt of tender)
four.2.7) Conditions for opening of tenders
Date
4 August 2023
Local time
12:00pm
Section six. Complementary information
six.1) Information about recurrence
This is a recurrent procurement: No
six.3) Additional information
The contracting authority considers that this contract may be suitable for economic operators that are small or medium enterprises (SMEs). However, any selection of tenderers will be based solely on the criteria set out for the procurement.
For more information about this opportunity, please visit the Delta eSourcing portal at:
https://www.delta-esourcing.com/tenders/UK-UK-London:-Museum-construction-work./H87YX2N3X3" target="_blank">https://www.delta-esourcing.com/tenders/UK-UK-London:-Museum-construction-work./H87YX2N3X3
To respond to this opportunity, please click here:
https://www.delta-esourcing.com/respond/H87YX2N3X3" target="_blank">https://www.delta-esourcing.com/respond/H87YX2N3X3
GO Reference: GO-2023630-PRO-23306156
six.4) Procedures for review
six.4.1) Review body
Museum of London
London
EC2Y 5HN
Country
United Kingdom