Contract

Supply, Commissioning, Training and Maintenance of Lifting Jacks

  • ABELLIO EAST MIDLANDS LIMITED

F06: Contract award notice – utilities

Notice identifier: 2024/S 000-000187

Procurement identifier (OCID): ocds-h6vhtk-03e05d

Published 4 January 2024, 10:38am



Section one: Contracting entity

one.1) Name and addresses

ABELLIO EAST MIDLANDS LIMITED

2nd Floor St Andrew's House,18-20 St Andrew Street

LONDON

EC4A3AG

Contact

Emma Martin

Email

Emma.martin@eastmidlandsrailway.co.uk

Telephone

+44 7917636540

Country

United Kingdom

Region code

UKI31 - Camden and City of London

Companies House

09860485

Internet address(es)

Main address

www.eastmidlandsrailway.co.uk

one.6) Main activity

Railway services


Section two: Object

two.1) Scope of the procurement

two.1.1) Title

Supply, Commissioning, Training and Maintenance of Lifting Jacks

Reference number

2023/S 000-019675

two.1.2) Main CPV code

  • 42413400 - Mechanical jacks

two.1.3) Type of contract

Supplies

two.1.4) Short description

This contract is for the design, supply, commissioning and Maintenance of Lifting Jacks. The supplier will be required to complete all elements of delivery and commissioning inclusive of cable management. The supply will be for 12 Lifting Jacks and associated equipment. The Jacks will be primarily used to maintain EMR's regional fleet, class 170 and class 158 vehicles with the requirement for a safe working load of 15 tonnes each.

The Lifting Jacks will be operated from Etches Park Depot, South Shed, Road 7.

two.1.6) Information about lots

This contract is divided into lots: No

two.2) Description

two.2.3) Place of performance

NUTS codes
  • UKF11 - Derby

two.2.4) Description of the procurement

Purchase of 12 Liting Jacks and associated control equipment capable of safely lifting the range of rolling stock, Class 158 and 170 Vehicles.

The Procurement involves Design, Commissioing and ongoing Maintenance requirements,

Thw Lifting Jacks will be electrically operated screw type, adequately rated for there intended duty.

The Jacks will be non Rail mounted.

The Jacks will be capable of lifting rolling stock and at lifting speed not greater than 300mm/min. All Jacks should be fitted wit an adjustable anvil lifting arm.

The anvil height range shall be sufficient to safely lift the types of rolling stock details.

Jacks shall have the capability of further expansion to allow additional identical sets to be used as 1 synchronised system for lifting multiple vehicles of 2 and 3 sets.

The Jacks will retain the ability to be operated in sets of 4 allowing for single car lifts.

The Jacks shall be capable of continuous operation in all weather conditions in a temperature rane of -5 to +35 degrees centrigrade inclusive.

Lifting Jack body and bracket to be finished in Safety Yellow

The Jacks shall include fork truck lifting pockets and Jack lifting points to assist in transporting/moving the Jacks,

Fork truck lifting pockets to be parrallel to the running rail.

two.2.11) Information about options

Options: No


Section four. Procedure

four.1) Description

four.1.1) Type of procedure

Negotiated procedure with prior call for competition

four.1.8) Information about the Government Procurement Agreement (GPA)

The procurement is covered by the Government Procurement Agreement: No

four.2) Administrative information

four.2.1) Previous publication concerning this procedure

Notice number: 2023/S 000-019675


Section five. Award of contract

A contract/lot is awarded: Yes

five.2) Award of contract

five.2.1) Date of conclusion of the contract

12 December 2023


Section six. Complementary information

six.4) Procedures for review

six.4.1) Review body

Abellio East Midlands Limited

Derby

Country

United Kingdom