Scope
Reference
Supply, delivery, installation, and commissioning of automated liquid handlers
Description
UK Biobank requires a supplier with the necessary capacity and capability to supply, deliver, install, and commission automated liquid handlers. UK Biobank requires the Supplier to provide the System and be responsible for the design, implementation, testing, commissioning, training and service support. Detail of the requirements for the goods and services are set out within the Specification.
UK Biobank is responsible for the safe preservation and scientific exploitation of over 17 million Samples (plasma, serum, buffy coat, extracted DNA, urine and saliva) that are accessible for approved use by academic and industry researchers. About 11 million Samples are stored at -80°C across an Automated Storage System and other manual Freezers at UK Biobank's headquarters in Stockport, Greater Manchester. The remaining 6 million Samples are stored in vapour phase Liquid Nitrogen Tanks at a Backup Site in the South of England.
UK Biobank undertakes the supply of Samples for different sizes of research projects:
- from handfuls to ~5,000 Cherry Picked Samples for piloting or case-control studies (where Samples are likely picked from across the whole collection);
- projects involving ~50,000 Samples (with some degree of Cherry Picking);
- longitudinal sets of Samples for the same Participants over several time-points; and/or
- retrieval of whole cohort sets (~500,000 Samples, with a higher density of Samples clustered together).
UK Biobank's next phase of strategic development will be characterised by increasing demand for access to Samples and several new
large-scale Sample collections. UK Biobank, therefore, requires new Systems with sufficient capacity, flexibility, and resilience to support the next 10 years of work as set out in this Specification. The System should deliver capacity to Reformat Samples to send to researchers to conduct assays and provide capability to process Vacutainers.
Consequently, UK Biobank has prepared a Specification for a Solution to meet the increased throughput demands that the new site must support foreseeable operational requirements and potential future developments, including but not limited to;
- Increase in Sample supply to external laboratories at least four-fold (1 million Samples per year); Reformatting.
- Extensive new Sample collections from UK Biobank Participants (and potentially their relatives) at multiple future time-points; Vacutainer Processing.
- Prospective creation of whole cohort Destination Samples (for projects) whilst a Stock Sample is thawed for processing, split the remaining Sample across multiple storage Tubes; Reformatting.
- Likely change to alternative Labware for new Sample collections and selective reformatting of existing Samples coincident with their next freeze-thaw cycle or en-masse; Reformatting.
The System will be required to support UK Biobank laboratory operations when they move to a New Site at the Manchester Science Park in the City of Manchester in the North West of England, UK. Practical completion of the New Site is planned for July 2026 (with early access to the laboratory area from May 2026 for installation of the Solution).
The move to Manchester Science Park will be accompanied by new Automated Storage Systems and new LIMS. The following work will be ongoing throughout 2026, in anticipation of an early 2027 opening to the New Site;
- Transfer 11 million Samples from the existing facility
- Install and commission new equipment and move and validate existing equipment
- Implement a new LIMS
The laboratory has been designed to accommodate Liquid Handling Systems in the Reformatting Lab (to support equipment to meet the mandatory throughput described in Sections 2.2.2 and 2.2.3). There is expansion space in the North of the ground floor that could be used for the optional expansion throughput described in Section 2.2.4.
As part of this procurement, some award questions are mandatory and will be scored on pass/fail basis, and others have with weighted scoring, as detailed in Volume 1 of the tender documents.
The estimated contract value for the purchase of the Liquid Handlers and the provision of services as set out in this Contract Notice and for the duration described may be in the range of £1.2m - £3.2m GBP. We do not anticipate the cost to deliver the Solution without expansion to exceed £1.8m.
UK Biobank reserves the right to discontinue or delay the procurement process and may decide not to award a contract as a result of this call for competition. UK Biobank shall not be liable for any costs or expenses incurred by any organisation in considering and/or responding to the procurement process. Tenders and supporting documents must be priced in pounds sterling and all payments made under the contract will be in pounds sterling, unless otherwise advised.
UK Biobank will incorporate a standstill period at the point the decision in relation to the award of the contracts is notified to bidders. The standstill period, which will be a minimum of ten (10) calendar days, provides time for unsuccessful bidders to lodge an appeal in regards to the award decisions, before the contracts are entered into.
Tenderers are advised to allow adequate time for uploading documents and to dispatch the electronic response well in advance of the closing time to avoid any last minute problems
NOTE: To register your interest in this notice and obtain any additional information please visit the myTenders Web Site at https://www.mytenders.co.uk/Search/Search_Switch.aspx?ID=233323.
A user guide is available at https://www.mytenders.co.uk/sitehelp/help_guides.aspx.
Total value (estimated)
- £3,200,000 excluding VAT
- £3,840,000 including VAT
Above the relevant threshold
Contract dates (estimated)
- 27 March 2026 to 26 March 2029
- Possible extension to 26 March 2032
- 6 years
Description of possible extension:
The initial term for the contract will be three years, with the option for UKB to extend the contract by further year-long periods, up to a maximum total term of 6 years (i.e. inclusive of the initial term), with the contract to commence in March 2026.
Main procurement category
Goods
CPV classifications
- 38000000 - Laboratory, optical and precision equipments (excl. glasses)
Contract locations
- UK - United Kingdom
Participation
Particular suitability
Small and medium-sized enterprises (SME)
Submission
Enquiry deadline
12 December 2025, 5:00pm
Tender submission deadline
5 January 2026, 12:00pm
Submission address and any special instructions
Tenders may be submitted electronically
Yes
Languages that may be used for submission
English
Award decision date (estimated)
9 March 2026
Award criteria
| Name | Description | Type | Weighting |
|---|---|---|---|
| Price | Price |
Price | 30.00% |
| Sample processing | Sample processing |
Quality | 10.00% |
| Throughput and Timings | Throughput and Timings |
Quality | 10.00% |
| Configuration | Configuration |
Quality | 7.00% |
| Traceability | Traceability |
Quality | 7.00% |
| LIMS integration | LIMS integration |
Quality | 7.00% |
| Error handling | Error handling |
Quality | 7.00% |
| Quality, Safety and Environment | Quality, Safety and Environment |
Quality | 7.00% |
| Overall solution | Overall solution |
Quality | 5.00% |
| Installation and Implementation | Installation and Implementation |
Quality | 5.00% |
| Maintenance, Servicing and Support | Maintenance, Servicing and Support |
Quality | 5.00% |
Other information
Applicable trade agreements
- Government Procurement Agreement (GPA)
Conflicts assessment prepared/revised
Yes
Procedure
Procedure type
Open procedure
Justification for not publishing a preliminary market engagement notice
A preliminary market engagement notice was not published as the requirements are not specialist, complex or niche, and the market is known , and UK Biobank understands our requirements.
Documents
Associated tender documents
https://www.mytenders.co.uk/Authority/NoticeBuilder/NoticeBuilder_FileDownload.aspx?id=621498
UK Biobank Liquid Handlers ITT Volume 1 201125
https://www.mytenders.co.uk/Authority/NoticeBuilder/NoticeBuilder_FileDownload.aspx?id=621499
UK Biobank Liquid Handlers ITT Volume 2 201125
https://www.mytenders.co.uk/Authority/NoticeBuilder/NoticeBuilder_FileDownload.aspx?id=621500
UK Biobank Liquid Handlers Specification 201125
https://www.mytenders.co.uk/Authority/NoticeBuilder/NoticeBuilder_FileDownload.aspx?id=621501
UK Biobank Liquid Handlers Key Contractual Principles 201125
Contracting authority
UK Biobank Ltd
- Public Procurement Organisation Number: PXGY-4832-TWCN
1-2 Spectrum Way
Stockport
SK3 0SA
United Kingdom
Contact name: Andrea Howard
Telephone: +44 7824 509469
Email: tenders@ukbiobank.ac.uk
Website: http://www.ukbiobank.ac.uk
Region: UKD35 - Greater Manchester South East
Organisation type: Public undertaking (commercial organisation subject to public authority oversight)