Section one: Contracting authority
one.1) Name and addresses
UK Battery Industrialisation Centre
Rowley Road, Baginton
Coventry
CV8 3AL
Contact
Miss Procurement Tenders
ProcurementTenders@ukbic.co.uk
Telephone
+44 2475267743
Country
United Kingdom
Region code
UK - United Kingdom
Internet address(es)
Main address
Buyer's address
one.3) Communication
The procurement documents are available for unrestricted and full direct access, free of charge, at
https://procontract.due-north.com/Advert?advertId=cbae9856-b67f-ed11-811c-005056b64545
Additional information can be obtained from the above-mentioned address
Tenders or requests to participate must be submitted electronically via
https://procontract.due-north.com/Advert?advertId=cbae9856-b67f-ed11-811c-005056b64545
one.4) Type of the contracting authority
Body governed by public law
one.5) Main activity
Other activity
Research & Development
Section two: Object
two.1) Scope of the procurement
two.1.1) Title
Slitter Equipment for UKBIC Flexible Industrialisation Line (FIL)
Reference number
DN648650
two.1.2) Main CPV code
- 31000000 - Electrical machinery, apparatus, equipment and consumables; lighting
two.1.3) Type of contract
Supplies
two.1.4) Short description
The UKBIC Flexible Industrialisation Line is designed to allow staged scale-up of electrode manufacture from laboratory scale through to GWh scale on UKBIC’s existing high-volume electrode lines. The project will be phased and in the first phase equipment will be purchased to allow scale-up of electrode processes from the Flexible Industrialisation Line to UKBIC’s high-volume electrode lines. This will incorporate mixing process compatible with UKBIC’s mainline process and coating and drying equipment which will take batches of slurry and convert them onto anode and cathode foils. Subsequent equipment will incorporate next generation electrode manufacturing processes, so solutions covering both scenarios are encouraged.
This new electrode capability will be supplemented by flexible equipment to Calender and slit the electrode reels allowing them to be converted into cells using the main UKBIC cylindrical and pouch cell assembly lines, or other flexible cell manufacturing equipment that may be installed during a later phase.
Slitting process equipment is required to allow UKBIC to process Anode and Cathode electrodes from its own in-house Coating and Calendering processes or from third party material produced external to UKBIC.
UKBIC currently has Slitting equipment in its Volume Industrialisation Line allowing for segregated Slitting of Anode and Cathode material however the size of the equipment is desired for Electrode Material at high levels of maturity and/or on a mass production scale. As a result, UKBIC is looking to install smaller equipment for customers at lower maturity level and allow for added flexibility and modularity as such that new/missing technologies from UKBICs Volume Industrialisation line can be used and proven.
The Slitting equipment will be installed in a new internal Clean Room facility to UKBIC and should allow for futureproofing with the known assumption of battery industry evolution and changes.
two.1.6) Information about lots
This contract is divided into lots: No
two.2) Description
two.2.2) Additional CPV code(s)
- 31000000 - Electrical machinery, apparatus, equipment and consumables; lighting
- 42000000 - Industrial machinery
two.2.3) Place of performance
NUTS codes
- UK - United Kingdom
two.2.4) Description of the procurement
Slitting process equipment is required to allow UKBIC to process Anode and Cathode electrodes from its own in-house Coating and Calendering processes or from third party material produced external to UKBIC.
UKBIC currently has Slitting equipment in its Volume Industrialisation Line allowing for segregated Slitting of Anode and Cathode material however the size of the equipment is desired for Electrode Material at high levels of maturity and/or on a mass production scale. As a result, UKBIC is looking to install smaller equipment for customers at lower maturity level and allow for added flexibility and modularity as such that new/missing technologies from UKBICs Volume Industrialisation line can be used and proven.
The Slitting equipment will be installed in a new internal Clean Room facility to UKBIC and should allow for futureproofing with the known assumption of battery industry evolution and changes.
two.2.5) Award criteria
Price is not the only award criterion and all criteria are stated only in the procurement documents
two.2.7) Duration of the contract, framework agreement or dynamic purchasing system
Duration in months
24
This contract is subject to renewal
No
two.2.10) Information about variants
Variants will be accepted: No
two.2.11) Information about options
Options: No
two.2.13) Information about European Union Funds
The procurement is related to a project and/or programme financed by European Union funds: No
Section four. Procedure
four.1) Description
four.1.1) Type of procedure
Open procedure
four.1.8) Information about the Government Procurement Agreement (GPA)
The procurement is covered by the Government Procurement Agreement: Yes
four.2) Administrative information
four.2.2) Time limit for receipt of tenders or requests to participate
Date
6 February 2023
Local time
12:00pm
four.2.4) Languages in which tenders or requests to participate may be submitted
English
four.2.7) Conditions for opening of tenders
Date
6 February 2023
Local time
12:00pm
Section six. Complementary information
six.1) Information about recurrence
This is a recurrent procurement: No
six.4) Procedures for review
six.4.1) Review body
Royal Courts of Justice
London
WC2A 2LL
Country
United Kingdom