Section one: Contracting authority
one.1) Name and addresses
THE UNIVERSITY OF BIRMINGHAM
Chancellors Close
BIRMINGHAM
B152TT
Contact
Kseniya Samsonik
Country
United Kingdom
Region code
UKG31 - Birmingham
Charity Commission (England and Wales)
X7237
Internet address(es)
Main address
www.birmingham.ac.uk/index.aspx
one.3) Communication
The procurement documents are available for unrestricted and full direct access, free of charge, at
www.in-tendhost.co.uk/universityofbirmingham/aspx/Home
Additional information can be obtained from the above-mentioned address
Tenders or requests to participate must be submitted electronically via
www.in-tendhost.co.uk/universityofbirmingham/aspx/Home
one.4) Type of the contracting authority
Body governed by public law
one.5) Main activity
Education
Section two: Object
two.1) Scope of the procurement
two.1.1) Title
Tender for the Supply and Installation an Ammonia Storage & Vaporisation Unit to the University of Birmingham
Reference number
SC11053/22
two.1.2) Main CPV code
- 24110000 - Industrial gases
two.1.3) Type of contract
Supplies
two.1.4) Short description
The University of Birmingham invites tenders for the supply of an ammonia storage and vaporisation unit capable of supplying ammonia at:
• 70kg/hr
• 8.0 Barg
• ≥25oC
The unit is part of a BEIS funded programme to construct an ammonia cracking plant to produce green hydrogen. The Tyseley Ammonia Project will design, build, commission, and operate the world's largest and most efficient ammonia to hydrogen conversion unit, demonstrating 200kg/day production of transport-grade hydrogen. It will be located at Tyseley Energy Park and co-located alongside an existing refuelling station. The hydrogen will be used to refuel local vehicles including 20 fuel cell buses that have been ordered by Birmingham City Council. The ammonia cracker combines decomposition and purification stages into a single, compact unit, with lower operational temperatures due to recent innovations in membrane technology. The project aims to dramatically improve the efficiency and economics of ammonia cracking, accelerate the development of hydrogen solutions in the UK and position the country at the forefront of an emerging global market.
The project is led by Gemserv, with partners EQUANS, H2SITE, Storengy, Yara, University of Birmingham and Tyseley Energy Park.
The ammonia unit will be integrated into ammonia cracking plant, being provided by other partners with operations being the responsibility of EQUANS.
This project may be funded by the European Regional Development Fund (ERDF) or;
- European Structural and Investment Fund (ESIF) or;
- Research Councils UK (RCUK), the strategic partnership of the UK's seven Research Councils.
two.1.6) Information about lots
This contract is divided into lots: No
two.2) Description
two.2.2) Additional CPV code(s)
- 24413000 - Ammonia
two.2.3) Place of performance
NUTS codes
- UKG31 - Birmingham
two.2.4) Description of the procurement
An initial FEED study for the ammonia storage and vaporisation unit has been commissioned from STAR technical solutions and the design is set out in the series of accompanying documents:
• 136800-001B.Ammonia P&ID.pdf [Ammonia plant P&ID document]
• 136800-002A.Equipment Layout.pdf [pdf of Equipment layout]
• 136800-002A.Equipment Layout.dwg [drawing file of Equipment layout]
• 136800-003A.Calulations.pdf [Calculations used in the plant design]
• 136800-004B.Principles of Operation.pdf [Description of how plant should operate]
• 136800-005A.Concept Design Ammonia Hazard Assessment.pdf
• 136800-006A.Hazard and Operability Study.pdf
• HAZOP Drawing.pdf
• HAZOP Keywords.pdf
• Hsg71 - Chemical Warehousing.pdf
The tender should comply with the specification as set out in these documents. All documents should be considered in detail as part of the tendering process.
The design of the ammonia storage and vaporisation unit base is to deliver ammonia at:
• 70kg/hr
• 8.0 Barg
• ≥25oC
Further requirements/considerations include (see documents for details):
• Small quantities of water are contained in ammonia when supplied by BOC. When transferring ammonia liquid from the drum tanks, water is also transferred. This added water must not affect the operation of the vaporiser. A system to separate the water from liquid ammonia must be included. The separated water must have a system to allow it to be decanted safely.
• The facility may require the ammonia delivery pressure to be reduced or increased. The design must be capable of supplying ammonia vapour at stable pressures between 6 to 10 Barg.
• The drum tank weight must be measured in position to know if the drum tanks are ready to be swapped out.
• Under no circumstance, the equipment operation will result in any back filling of the BOC drum tanks with liquid ammonia resulting in overcharging the drum tanks.
• The safety systems that must be included are those detailed in BS EN378 Part 1 to 4 and any standards referenced. Ammonia is used in refrigeration systems and all the safety requirements within these standards apply to this project.
• The adding of ammonia to the system must be simple; no venting of liquid when removing hoses and any vapour must be vented through water in a controlled manner
two.2.5) Award criteria
Quality criterion - Name: Compliance to the Specifications / Weighting: 40
Quality criterion - Name: After Sales and Technical back up / Weighting: 10
Quality criterion - Name: Delivery and Training / Weighting: 10
Quality criterion - Name: Sustainability and Environmental / Weighting: 5
Quality criterion - Name: Standard Supplier Questionnaire (SQ) / Weighting: 10
Price - Weighting: 25
two.2.7) Duration of the contract, framework agreement or dynamic purchasing system
End date
1 May 2023
This contract is subject to renewal
No
two.2.10) Information about variants
Variants will be accepted: No
two.2.11) Information about options
Options: No
Section four. Procedure
four.1) Description
four.1.1) Type of procedure
Open procedure
four.1.8) Information about the Government Procurement Agreement (GPA)
The procurement is covered by the Government Procurement Agreement: Yes
four.2) Administrative information
four.2.2) Time limit for receipt of tenders or requests to participate
Date
26 September 2022
Local time
11:59am
four.2.4) Languages in which tenders or requests to participate may be submitted
English
four.2.7) Conditions for opening of tenders
Date
26 September 2022
Local time
12:00pm
Section six. Complementary information
six.1) Information about recurrence
This is a recurrent procurement: No
six.4) Procedures for review
six.4.1) Review body
University of Birmingham
Birmingham
B15 2TT
Country
United Kingdom