Section one: Contracting authority
one.1) Name and addresses
University Of Edinburgh
Charles Stewart House, 9-16 Chambers Street
Edinburgh
EH1 1HT
Country
United Kingdom
NUTS code
UKM75 - Edinburgh, City of
Internet address(es)
Main address
Buyer's address
https://www.publiccontractsscotland.gov.uk/search/Search_AuthProfile.aspx?ID=AA00107
one.3) Communication
The procurement documents are available for unrestricted and full direct access, free of charge, at
https://www.publictendersscotland.publiccontractsscotland.gov.uk/
Additional information can be obtained from the above-mentioned address
Tenders or requests to participate must be submitted electronically via
https://www.publictendersscotland.publiccontractsscotland.gov.uk/
one.4) Type of the contracting authority
Body governed by public law
one.5) Main activity
Education
Section two: Object
two.1) Scope of the procurement
two.1.1) Title
EC1021 Booster Pumps and Boilers and Associated Equipment - Planned and Reactive Maintenance
Reference number
EC1021
two.1.2) Main CPV code
- 50500000 - Repair and maintenance services for pumps, valves, taps and metal containers and machinery
two.1.3) Type of contract
Services
two.1.4) Short description
The University of Edinburgh wishes to appoint Contractor(s) for the planned and reactive maintenance of:
- Lot 1 Booster Pumps, Expansion Vessels, Pressurisation Units and Associated Equipment
- Lot 2 Main Boiler Units and Associated Equipment
Bidders can bid for one or both Lots. Bidders can be appointed to one or both Lots.
two.1.5) Estimated total value
Value excluding VAT: £1,375,103.93
two.1.6) Information about lots
This contract is divided into lots: Yes
Tenders may be submitted for all lots
two.2) Description
two.2.1) Title
Booster Pumps, Expansion Vessels, Pressurisation Units and Associated Equipment
Lot No
1
two.2.2) Additional CPV code(s)
- 50000000 - Repair and maintenance services
- 50500000 - Repair and maintenance services for pumps, valves, taps and metal containers and machinery
- 50511000 - Repair and maintenance services of pumps
two.2.3) Place of performance
NUTS codes
- UKM75 - Edinburgh, City of
two.2.4) Description of the procurement
The University of Edinburgh wishes to appoint a single contractor to provide planned and reactive maintenance to booster pumps, expansion vessels, pressurisation units and associated equipment, in accordance with manufacturers recommendations and SFG20 Maintenance Task Schedules. The planned maintenance consists of quarterly visits to inspect, service and maintain the assets. The reactive maintenance consists of repairing or replacing broken equipment as and when required. Additionally, the University is looking to carry out a condition based replacement programme during this contract.
This will ensure that the equipment is maintained to the highest standard, reducing unscheduled downtime, improving reliability and reducing energy consumption, running costs and delivering optimum performance from the equipment.
Please refer to the ITT tender documents for full details of the requirement.
two.2.5) Award criteria
Quality criterion - Name: Quality / Weighting: 80
Price - Weighting: 20
two.2.7) Duration of the contract, framework agreement or dynamic purchasing system
Duration in months
24
This contract is subject to renewal
Yes
Description of renewals
Two years with the option to extend for up to two additional years (2+1+1)
two.2.10) Information about variants
Variants will be accepted: No
two.2.11) Information about options
Options: No
two.2.13) Information about European Union Funds
The procurement is related to a project and/or programme financed by European Union funds: No
two.2) Description
two.2.1) Title
Main Boilers and Associated Equipment
Lot No
2
two.2.2) Additional CPV code(s)
- 50531100 - Repair and maintenance services of boilers
- 50500000 - Repair and maintenance services for pumps, valves, taps and metal containers and machinery
two.2.3) Place of performance
NUTS codes
- UKM75 - Edinburgh, City of
two.2.4) Description of the procurement
The University of Edinburgh wishes to appoint a single contractor to provide planned and reactive maintenance to main boilers and associated equipment, in accordance with manufacturers recommendations and SFG20 Maintenance Task Schedules. The planned maintenance consists of six-monthly visits to inspect, service and maintain the assets. The reactive maintenance consists of repairing equipment and replacing broken components as and when required.
This will ensure that the equipment is maintained to the highest standard, reducing unscheduled downtime, improving reliability and reducing energy consumption, running costs and delivering optimum performance from the equipment.
Please refer to the ITT tender documents for full details of the requirement.
two.2.5) Award criteria
Quality criterion - Name: Quality / Weighting: 80
Price - Weighting: 20
two.2.7) Duration of the contract, framework agreement or dynamic purchasing system
Duration in months
24
This contract is subject to renewal
Yes
Description of renewals
Two years with the option to extend for up to two additional years (2+1+1)
two.2.10) Information about variants
Variants will be accepted: No
two.2.11) Information about options
Options: No
two.2.13) Information about European Union Funds
The procurement is related to a project and/or programme financed by European Union funds: No
Section three. Legal, economic, financial and technical information
three.1) Conditions for participation
three.1.1) Suitability to pursue the professional activity, including requirements relating to enrolment on professional or trade registers
List and brief description of conditions
SPD Part IV: Selection Criteria - A: Suitability - Question 4A.2:
For Lot 2 only:
Bidders must confirm and provide evidence that they hold Gas Safe Registration.
Please note bidders for Lot 2 must have this registration at time of tender, and ‘working towards’ is not acceptable
three.1.2) Economic and financial standing
List and brief description of selection criteria
Part IV: Selection criteria - B: Economic and financial standing – Question 4B1.1 (turnover requirement), 4B5.1 and 4B5.2 (insurance requirements), and 4B6 (other requirements).
Minimum level(s) of standards possibly required
Question 4B1.1
Tenderers are required to have the following minimum “general” annual turnover for the last three financial years.
- For Lot 1 only: GBP 336,812.45
- For Lot 2 only: GBP 350,739.52
- For Lot 1 and 2 (if bidding for both Lots): GBP 687,552
Where turnover information is not available for the time period requested, the bidder will be required to state the date which they were set up/started trading in question 4B3
Question 4B5.1 and 4B5.2
Tenderers are required to hold, or commit to obtaining prior to the commencement of any subsequently awarded contract, the types and levels of insurance indicated below:
- Employer’s Liability = GBP 5 million
- Public Liability = GBP 10 million
- Professional Indemnity = GBP 2 million
Question 4B6
SPD 4B.6 Statement 1 (PCG):
Where the bidder is providing a submission on behalf of a subsidiary company, upon request, the bidder must obtain a Parent Company Guarantee prior to commencement of any subsequently awarded contract.
SPD 4B.6 Statement 2 (Financial Strength):
Bidders will be required to provide adequate assurance of financial strength to successfully complete their contractual obligations.
Bidders must be able to provide upon request, their 3 most recent sets of annual audited accounts, including profit and loss information, and the following ratios:
- Current Ratio
- Quick Ratio
- Debtors Turnover Ratio
- Return on Assets
- Working Capital
- Debt to Equity Ratio
- Gross Profit Ratio
A review of your ratios and audited accounts may be undertaken. In some cases this review may lead to an additional request for further financial information to help clarify any potential issues raised.
This information may be used to assess financial sustainability.
three.1.3) Technical and professional ability
List and brief description of selection criteria
Part IV: Selection criteria - C: Technical and Professional Ability – Question 4C1.2 and 4C10
Minimum level(s) of standards possibly required
Question 4C1.2
Bidders will be required to provide three examples of services carried out during the past three years that demonstrate that you have experience to deliver the services described in the Contract Notice that are similar in value and complexity for Lot 1 and/or Lot 2. Bidders only need to provide examples for the Lot they are bidding for. Please refer to the ITT tender documents for full details.
Question 4C10
Bidders will be required to confirm whether they intend to subcontract and, if so, for what proportion of the contract.
three.2) Conditions related to the contract
three.2.2) Contract performance conditions
Please refer to the ITT tender documents for full details.
Section four. Procedure
four.1) Description
four.1.1) Type of procedure
Open procedure
four.1.8) Information about the Government Procurement Agreement (GPA)
The procurement is covered by the Government Procurement Agreement: Yes
four.2) Administrative information
four.2.1) Previous publication concerning this procedure
Notice number: 2024/S 000-013705
four.2.2) Time limit for receipt of tenders or requests to participate
Date
26 August 2024
Local time
12:00pm
four.2.4) Languages in which tenders or requests to participate may be submitted
English
four.2.6) Minimum time frame during which the tenderer must maintain the tender
Duration in months: 4 (from the date stated for receipt of tender)
four.2.7) Conditions for opening of tenders
Date
26 August 2024
Local time
12:00pm
Section six. Complementary information
six.1) Information about recurrence
This is a recurrent procurement: Yes
Estimated timing for further notices to be published: Summer 2028
six.2) Information about electronic workflows
Electronic ordering will be used
Electronic invoicing will be accepted
Electronic payment will be used
six.3) Additional information
SPD Part IV: Selection criteria - D: Quality Assurance Schemes & Environmental Management Standards– Question 4D1 and 4D2
4D1 Statement 1 Quality Management:
The bidder must hold a UKAS (or equivalent) accredited independent third party certificate of compliance in accordance with BS EN ISO 9001 (or equivalent). If the bidder does not hold this, then the bidder must have equivalent, regulated reviewed documented policy and processes. Please refer to the ITT tender documents for full details.
4D1 Statement 2 Health and Safety:
The bidder must hold a UKAS (or equivalent), accredited independent third party certificate of compliance in accordance with ISO 45001 (or equivalent) or have, within the last 12 months, successfully met the assessment requirements of a construction-related scheme in registered membership of the Safety Schemes in Procurement (SSIP) forum. If the bidder does not hold this, then the bidder must have equivalent, regulated reviewed documented policy and processes. Please refer to the ITT tender documents for full details.
4D2 Statement Environmental Management System:
The Bidder must hold a UKAS (or equivalent) accredited independent third party certificate of compliance with BS EN ISO 14001 (or equivalent) or a valid EMAS (or equivalent) certificate. If the bidder does not hold this, then the bidder must have equivalent, regulated reviewed documented policy and processes. Please refer to the ITT tender documents for full details.
The buyer is using PCS-Tender to conduct this ITT exercise. The Project code is 27162. For more information see: http://www.publiccontractsscotland.gov.uk/info/InfoCentre.aspx?ID=2343
Community benefits are included in this requirement. For more information see: https://www.gov.scot/policies/public-sector-procurement/community-benefits-in-procurement/
A summary of the expected community benefits has been provided as follows:
Please refer to the ITT tender documents for full details.
(SC Ref:772534)
six.4) Procedures for review
six.4.1) Review body
Edinburgh Sheriff Court
Edinburgh Sheriff Court, 27 Chambers Street
Edinburgh
EH1 1LB
Country
United Kingdom