Section one: Contracting authority
one.1) Name and addresses
North Lanarkshire Council
Civic Centre, Windmillhill Street
Motherwell
ML1 1AB
corporateprocurement@northlan.gov.uk
Telephone
+44 1698403876
Fax
+44 1698275125
Country
United Kingdom
NUTS code
UKM84 - North Lanarkshire
Internet address(es)
Main address
http://www.northlanarkshire.gov.uk
Buyer's address
https://www.publiccontractsscotland.gov.uk/search/Search_AuthProfile.aspx?ID=AA00010
one.2) Information about joint procurement
The contract is awarded by a central purchasing body
one.3) Communication
The procurement documents are available for unrestricted and full direct access, free of charge, at
www.publiccontractscotland.gov.uk
Additional information can be obtained from the above-mentioned address
Tenders or requests to participate must be submitted electronically via
www.publiccontractscotland.gov.uk
one.4) Type of the contracting authority
Regional or local authority
one.5) Main activity
General public services
Section two: Object
two.1) Scope of the procurement
two.1.1) Title
MTC Gas Heating System Replacements 2022 - 2026
Reference number
NLC-CPT-20-060 HO-HT-21-045
two.1.2) Main CPV code
- 45331100 - Central-heating installation work
two.1.3) Type of contract
Works
two.1.4) Short description
It is proposed that the scope of services comprise of the removal and replacement of gas heating systems including boilers, radiators, pipework and associated works.
The total estimated Contract value is up to 24,000,000 GBP split over two lots as follows:
Lot 1 – total value up to 14,000,000 GBP (up to a maximum of 5,000,000 GBP per annum);
Lot 2 – total value up to 10,000,000 GBP (up to a maximum of 4,000,000 GBP per annum)
two.1.5) Estimated total value
Value excluding VAT: £24,000,000
two.1.6) Information about lots
This contract is divided into lots: Yes
Tenders may be submitted for all lots
Maximum number of lots that may be awarded to one tenderer: 1
two.2) Description
two.2.1) Title
Lot 1 - Gas Heating System Replacements
Lot No
1
two.2.2) Additional CPV code(s)
- 45331100 - Central-heating installation work
two.2.3) Place of performance
NUTS codes
- UKM84 - North Lanarkshire
Main site or place of performance
North Lanarkshire Council area
two.2.4) Description of the procurement
The removal and replacement of gas heating systems including boilers, radiators, pipework and associated works; total value up to 14,000,000 GBP (up to a maximum of 5,000,000 GBP per annum).
two.2.5) Award criteria
Quality criterion - Name: End User Satisfaction / Weighting: 25%
Quality criterion - Name: Project Delivery - Programme / Weighting: 15%
Quality criterion - Name: Project Delivery - Project Team / Weighting: 10%
Quality criterion - Name: Health & Safety and Environmental / Weighting: 20%
Quality criterion - Name: Fair Work Practices / Weighting: 10%
Quality criterion - Name: Community Benefits Offered for the minimum Contract period of 22 months / Weighting: 10%
Quality criterion - Name: Community Benefits Offered for the duration of the possible extension periods (aggregate maximum of 24 months) / Weighting: 5%
Quality criterion - Name: Community Benefits Supporting Methodology / Weighting: 5%
Price - Weighting: 60
two.2.7) Duration of the contract, framework agreement or dynamic purchasing system
Duration in months
22
This contract is subject to renewal
Yes
Description of renewals
Initial proposed Contract will be 22 months, with option to extend for a further 24 months (each such extension period or periods being no less than 3 months provided that the max extension in aggregate will be a period of 24 months from the expiry of the initial contract period), subject to satisfactory operation and performance. Any periods of extension will be at the Council's sole discretion.
two.2.10) Information about variants
Variants will be accepted: No
two.2.11) Information about options
Options: No
two.2.13) Information about European Union Funds
The procurement is related to a project and/or programme financed by European Union funds: No
two.2.14) Additional information
Candidates should read and refer to the ITT. Failure to comply with the instructions contained within the ITT may result in a Candidate's submission being rejected. Economic operators may be excluded from this competition if they are in any of the situations referred to in Regulation 58 of the Public Contracts (Scotland) Regulations 2015.
DEADLINE FOR QUESTIONS IS 04/10/21 AT 12 NOON.
two.2) Description
two.2.1) Title
Lot 2 - Gas Heating System Replacements
Lot No
2
two.2.2) Additional CPV code(s)
- 45331100 - Central-heating installation work
two.2.3) Place of performance
NUTS codes
- UKM84 - North Lanarkshire
Main site or place of performance
North Lanarkshire Council area
two.2.4) Description of the procurement
The removal and replacement of gas heating systems including boilers, radiators, pipework and associated works; total value up to 10,000,000 GBP (up to a maximum of 4,000,000 GBP per annum).
two.2.5) Award criteria
Quality criterion - Name: End User Satisfaction / Weighting: 25%
Quality criterion - Name: Project Delivery - Programme / Weighting: 15%
Quality criterion - Name: Project Delivery - Project Team / Weighting: 10%
Quality criterion - Name: Health & Safety and Environmental / Weighting: 20%
Quality criterion - Name: Fair Work Practices / Weighting: 10%
Quality criterion - Name: Community Benefits Offered for the minimum Contract period of 22 months / Weighting: 10%
Quality criterion - Name: Community Benefits Offered for the duration of the possible extension periods (aggregate maximum of 24 months) / Weighting: 5%
Quality criterion - Name: Community Benefits Supporting Methodology / Weighting: 5%
Price - Weighting: 60
two.2.7) Duration of the contract, framework agreement or dynamic purchasing system
Duration in months
22
This contract is subject to renewal
Yes
Description of renewals
Initial proposed Contract will be 22 months, with option to extend for a further 24 months (each such extension period or periods being no less than 3 months provided that the max extension in aggregate will be a period of 24 months from the expiry of the initial contract period), subject to satisfactory operation and performance. Any periods of extension will be at the Council's sole discretion.
two.2.10) Information about variants
Variants will be accepted: No
two.2.11) Information about options
Options: No
two.2.13) Information about European Union Funds
The procurement is related to a project and/or programme financed by European Union funds: No
two.2.14) Additional information
Candidates should read and refer to the ITT. Failure to comply with the instructions contained within the ITT may result in a Candidate's submission being rejected. Economic operators may be excluded from this competition if they are in any of the situations referred to in
Regulation 58 of the Public Contracts (Scotland) Regulations 2015.
DEADLINE FOR QUESTIONS IS 04/10/21 AT 12 NOON.
Section three. Legal, economic, financial and technical information
three.1) Conditions for participation
three.1.1) Suitability to pursue the professional activity, including requirements relating to enrolment on professional or trade registers
List and brief description of conditions
SPD Selection Criteria, Part IV Section A: Suitability
4A.1 and 4A.1.1 Minimum level of standards require:
4A.1 - Bidder is enrolled in the relevant professional or trade registers kept in its country of establishment.
Bidders must be registered or enrolled in the relevant professional or trade register kept in its country of establishment (as described in Schedule 5 of Public Contracts (Scotland) Regulations 2015).
Bidders should confirm they are registered or enrolled on the relevant trade register and provide information relating to this, i.e. registration number, member number etc.
Bidders that are unable to meet all of the minimum level(s) of standards required for questions 4A.1 and 4A.1.1 (Part IV, A Suitability of the SPD), will be assessed as a FAIL and will be excluded from the competition.
Bidders may be assessed as a FAIL and be excluded from the competition if they fail to provide a response to this question.
4A.1.1 - If the relevant documentation is available electronically please indicate.
Bidders may be assessed as a FAIL and be excluded from the competition if they fail to provide a response to this question.
three.1.2) Economic and financial standing
List and brief description of selection criteria
SPD Selection Criteria, Part IV, Section B: Economic and Financial Standing, the following questions:
4B.1.2, 4B.3, 4B.4, 4B.4.1, 4B.5.1b, 4B.5.2, and 4B.5.3
Minimum level(s) of standards possibly required
4B.1.2 - Bidders will be required to have an average yearly turnover of a minimum of:
5,000,000GBP for Lot 1; and
4,000,000GBP for Lot 2;
for the last three (3) years that statutory accounts are available.
Bidders who have not yet submitted three years’ statutory accounts but can demonstrate three years of trading must detail the date they started trading within their submission at 4B.3 and may provide alternative proof which demonstrates their financial standing in an equivalent manner in accordance with Regulation 61 – Means of Proof of the Public Contracts (Scotland) Regulations 2015. Such Bidders are required to provide financial accounts for the three years most recently available, accompanied by a letter supporting the basis of their preparation from an audit registered firm.
4B.3 - Where turnover information is not available for the time period requested, the Bidder will be required to state the date which they were set up or started trading.
4B.4 - Bidders will be required to meet the undernoted Current Ratio minimum requirements.
Current Ratio
The acceptable range for the Current Ratio is:
Minimum value required: a value of greater than or equal to 1.00 in each of the last three financial years to 2 decimal places.
The Current Ratio will be calculated as follows: Current Assets divided by Current Liabilities, calculated to 2 decimal places.
The bidder will be required to provide their audited financial accounts for the previous three years in order that the Council may confirm this ratio
4B.5.1b - Bidders must confirm they already have or commit to obtain prior to the commencement of the Contract, the following levels of insurance cover:
1) Employer’s (Compulsory) Liability Insurance: 10,000,000 GBP each and every claim.
http://www.hse.gov.uk/pubns/hse40.pdf
4B.5.2 - Bidders must confirm they already have or commit to obtain prior to the commencement of the contract, the following levels of insurance cover:
1) Public Liability Insurance: 5,000,000 GBP each and every claim.
2) Product Liability Insurance: 5,000,000 GBP each and every claim.
If the relevant documentation is available electronically, please indicate.
Bidders that are unable to meet all of the minimum level(s) of standards required for questions 4B.1.2, 4B.3, 4B.4, 4B.4.1, 4B.5.1b, 4B.5.2, and 4B.5.3 (Part IV Section B, Economic and Financial Standing of the SPD), will be assessed as a FAIL and will be excluded from the competition, unless the following information is provided as part of their tender submission:
1) an SPD submission from a Parent Company (or Ultimate Parent Company) who can meet all the above minimum requirements; and
2) a declaration that the Parent Company (or Ultimate Parent Company) is prepared to provide a Parent Company Guarantee (PCG) in the form determined by the Council to cover the duration of the proposed Contract, including the available extension periods.
three.1.3) Technical and professional ability
List and brief description of selection criteria
Owing to the character limitations in this section of the Contract Notice it is not possible to provide all of the information relating to this section (III.1.3) in the Contract Notice). Therefore the Objective and Non-Discriminatory Criteria for Questions 4C.1, 4C.6 and 4C.10 are set out in full in the SPD(S) and SPD(S) Minimum Requirements document, which can be accessed through the buyer attachment area within the portal.
SPD Selection Criteria, Part IV Section C: Technical and Professional Ability:
4C.1. 4C.6 and 4C.10.
SPD Selection Criteria, Part IV Section D: Quality Assurance Schemes and Environmental Management Standards:
List and brief description of selection criteria:
Owing to the character limitations in this section of the Contract Notice it is not possible to provide all of the information relating to this section (III.1.3 in the Contract Notice). Therefore the Objective and Non-Discriminatory Criteria for Questions 4D.1, 4D.1.1, 4D.1.2, 4D.2, 4D.2.1, and 4D.2.2 are set out in full in the SPD(S) and the SPD(S) Minimum Requirements document, which can be accessed through the buyer attachment area within the portal.
SPD Selection Criteria, Part IV Section D: Quality Assurance Schemes and Environmental Management Standards:
4D.1, 4D.1.1, 4D.1.2, 4D.2, 4D.2.1 and 4D.2.2.
Minimum level(s) of standards possibly required
4C.1 - Bidders will be required to provide examples of works carried out in the past five years that demonstrate that they have the relevant experience to deliver the work as described in part II.2.4 of the Find a Tender Service Contract Notice or the relevant section of the Site Notice.
3 examples are required for each lot that the bidder is tendering for; however, the examples chosen can be used for both lots. At least one example should be from the last 3 years.
Question 4C.1 carries an overall weighting of 100% with 34% attributed to the first example and 33% attributed to examples 2 and 3. Each example provided should be in line with the value, scope, scale, and complexity of the Proposed Contract and should demonstrate that your role in the works was similar to that anticipated in the Proposed Contract.
As a minimum, each example provided should detail the constraints, risks and challenges encountered and how these were managed and mitigated, including community engagement, project management, programme management, and KPI evaluations.
Bidders must achieve an overall combined minimum score requirement of 70 per lot.
Bidders unable to meet the minimum requirements for 4C.1 will be assessed as a FAIL and will be excluded from the competition.
4C.6 – Bidders will be required to confirm and provide proof that they have all of the following relevant educational and professional qualifications:
1. Gas Safe registration;
2. NICEIC registration; and
3. the installers’ registration cards together with relevant ACS and CPA1 documentation are to be submitted for approval prior to works commencing.
Bidders may provide alternative accreditations to those listed above. Any alternative accreditation must be accompanied by documented evidence to demonstrate the alternative is equivalent to the accreditation noted above.
Bidders who do not have all of the above educational and professional qualifications will be assessed as a FAIL and will be excluded from the competition.
4C.10 - Bidders will be required to confirm whether they intend to subcontract and, if so, for what proportion of the contract.
Bidders may be assessed as a FAIL and be excluded from the competition if they fail to provide a response to this question.
4D.1 (Quality Management and Health and Safety Procedures)
Quality Management Procedures
The bidder must hold and provide proof of a UKAS (or equivalent) accredited independent third-party certificate of compliance in accordance with BS EN ISO 9001 (or equivalent) or satisfy items a-g as detailed in 4D.1.1.
Health and Safety Procedures
The bidder must hold and provide proof of a UKAS (or equivalent) accredited independent third party certificate of compliance in accordance with BS EN ISO 45001 (or equivalent) or have, within the last 12 months, successfully met the assessment requirements of a construction-related scheme in registered membership of the Safety Schemes in Procurement (SSIP) forum or satisfy items a-l in 4D.1.1.
4D.1.2 - If the relevant documentation is available electronically, please indicate.
4D.2 - The Bidder must hold and provide a UKAS (or equivalent) accredited independent third-party certificate of compliance with BS EN ISO 14001 (or equivalent) or satisfy items a-g as listed in 4D.2.1.
Bidders unable to meet the minimum requirements for all of SPD Section 4D will be assessed as a FAIL and will be excluded from the competition.
three.2) Conditions related to the contract
three.2.2) Contract performance conditions
The Invitation to Tender (ITT) will contain the relevant Contract Performance requirements.
Section four. Procedure
four.1) Description
four.1.1) Type of procedure
Open procedure
four.1.8) Information about the Government Procurement Agreement (GPA)
The procurement is covered by the Government Procurement Agreement: Yes
four.2) Administrative information
four.2.2) Time limit for receipt of tenders or requests to participate
Date
11 October 2021
Local time
12:00pm
four.2.4) Languages in which tenders or requests to participate may be submitted
English
four.2.6) Minimum time frame during which the tenderer must maintain the tender
Duration in months: 6 (from the date stated for receipt of tender)
four.2.7) Conditions for opening of tenders
Date
11 October 2021
Local time
12:00pm
Section six. Complementary information
six.1) Information about recurrence
This is a recurrent procurement: Yes
Estimated timing for further notices to be published: 2nd Quarter 2024
six.2) Information about electronic workflows
Electronic ordering will be used
Electronic invoicing will be accepted
Electronic payment will be used
six.3) Additional information
The information required in Part II of the SPD is for information only and will therefore not be assessed. The Council may however choose not to select Bidders who cannot provide basic company information.
Bidders must ensure that they submit appropriate SPDs completed by other members of the group (if they are bidding as part of a group), others whose capacity they rely on, and known sub-contractors on whose capacity they do not rely on, to satisfy any aspect of the SPD.
Bidders unable to complete SPD(S) Part IV: Concluding Statements may be excluded from the competition.
The complete ITT, with no pages omitted, must be submitted in accordance with instructions given, and be signed by an authorised representative (i.e. company director, secretary or other person authorised by the Candidate to do so). If the signatory is not the Candidate then the Candidate must provide, at the time of submitting the ITT, written confirmation of the signatory's authority to submit the ITT.
Bidders should note that all documents listed in ITT Section 12 "Checklist of Required Documents" must be fully completed and submitted to ensure the submission is considered complete. Failure to do so may result in the submission being deemed non-compliant.
Quality Questions - Minimum Score – If the average final score for any quality question response is below the minimum score requirement set for that question, then the submission response will be deemed non-compliant. For the avoidance of doubt, if any quality question is unanswered this will result in the bid being deemed non-compliant.
Declaration of Non-involvement in Serious Organised Crime - In the case of any criminal history checks, the Council may exclude Bidders where the information provided to the Council by the Police Service of Scotland does not validate fully the information provided by the Bidder. Failure to disclose information that is relevant to this section or serious misrepresentation in relation to the information disclosed will result in exclusion from the Procurement or the termination of any subsequent contract that may be/has been awarded.
NOTE: To register your interest in this notice and obtain any additional information please visit the Public Contracts Scotland Web Site at https://www.publiccontractsscotland.gov.uk/Search/Search_Switch.aspx?ID=665344.
The buyer has indicated that it will accept electronic responses to this notice via the Postbox facility. A user guide is available at https://www.publiccontractsscotland.gov.uk/sitehelp/help_guides.aspx.
Suppliers are advised to allow adequate time for uploading documents and to dispatch the electronic response well in advance of the closing time to avoid any last minute problems.
A sub-contract clause has been included in this contract. For more information see: http://www.publiccontractsscotland.gov.uk/info/InfoCentre.aspx?ID=2363
Community benefits are included in this requirement. For more information see: http://www.publiccontractsscotland.gov.uk/info/InfoCentre.aspx?ID=2361
A summary of the expected community benefits has been provided as follows:
North Lanarkshire Council's policy on community benefits in procurement aims to consider whether community benefits can be included where it is making capital investments or services/goods are being purchased.
An indication of the type of benefits which the Council expects is indicated within the ITT documents for this procurement exercise. Bidders will be required to provide details within their tender submission of the Community Benefits they will deliver if their tender submission is successful. It should be noted that the Community Benefit commitments made at tender stage may form a contractual obligation.
(SC Ref:665344)
six.4) Procedures for review
six.4.1) Review body
Scottish Courts
Edinburgh
Country
United Kingdom
six.4.3) Review procedure
Precise information on deadline(s) for review procedures
An economic operator that suffers, or is at risk of suffering, loss or damage attributable to a breach of duty under the Public Contracts (Scotland) Regulations 2015 or the Procurement Reform (Scotland) Act 2014, may bring proceedings in the Sheriff Court or the Court of Session.