Tender

UKRI-1117 - Chilbolton Observatory Raman Lidar

  • UK Research & Innovation

F02: Contract notice

Notice identifier: 2021/S 000-021146

Procurement identifier (OCID): ocds-h6vhtk-02da0a

Published 26 August 2021, 12:15pm



Section one: Contracting authority

one.1) Name and addresses

UK Research & Innovation

Polaris House, North Star Avenue

Swindon

SN2 1FL

Contact

STFC Procurement

Email

stfcprocurement@ukri.org

Telephone

+44 1793442000

Country

United Kingdom

NUTS code

UKK14 - Swindon

Internet address(es)

Main address

www.ukri.org

one.3) Communication

The procurement documents are available for unrestricted and full direct access, free of charge, at

https://www.delta-esourcing.com/tenders/UK-UK-Swindon:-Lasers./295242HVC4

Additional information can be obtained from the above-mentioned address

Tenders or requests to participate must be submitted to the above-mentioned address

one.4) Type of the contracting authority

Body governed by public law

one.5) Main activity

Other activity

Research and Innovation


Section two: Object

two.1) Scope of the procurement

two.1.1) Title

UKRI-1117 - Chilbolton Observatory Raman Lidar

Reference number

UKRI-1117

two.1.2) Main CPV code

  • 38636100 - Lasers

two.1.3) Type of contract

Supplies

two.1.4) Short description

The Science and Technology Facilities Council, part of UK Research and Innovation are seeking proposals from suppliers for an atmospheric Raman lidar system for installation at STFC Chilbolton Observatory.

two.1.5) Estimated total value

Value excluding VAT: £300,000

two.1.6) Information about lots

This contract is divided into lots: No

two.2) Description

two.2.3) Place of performance

NUTS codes
  • UKJ3 - Hampshire and Isle of Wight
Main site or place of performance

Hampshire and Isle of Wight

two.2.4) Description of the procurement

STFC wish to procure an atmospheric Raman lidar system for installation at STFC Chilbolton Observatory. The system should have the following features, which are expanded further in subsequent sections:

1. It should be housed in a customised standard 20 foot ISO container with climate control. The container must be weatherproof and lightproof, except for the windows designed for laser beam transmission. It must be IP66 compliant.

2. It must have a design transmitting at a minimum, a single wavelength of 355 nm and recording elastic and inelastic (Raman-scattered at 387 nm) backscattering coefficient, and linear depolarisation ratio.

3. It must meet ACTRIS (Aerosols, Clouds, and Trace gases Research Infrastructure) requirements for a single wavelength system.

4. The instrument and container must be designed in such a way that it is straightforward to upgrade to transmit 532 nm and 1064 nm for the measurement of elastic and inelastic (Raman) backscattering coefficient and linear depolarisation ratio and to measure water vapour profiles using the 355nm beam without major modifications to the structure. It is anticipated that the measurement of linear depolarisation ratio at 1064 nm will require the use of a 2nd laser in order to ensure sufficient polarisation purity, and possibly a 2nd receiver. There should therefore be adequate space in the current design to allow this upgrade, unless a method not requiring this extra hardware is proposed and justified.

5. Full overlap of transmitted beam and receiver field of view must be achieved no higher than 300 metres with the capability to add lower range observations at a future date. This may require there to be sufficient space to accommodate the additional hardware (such as telescope, receiver optics, detectors).

6. Start-of-operation setup and ongoing alignment procedures must be automated as far as possible.

7. It should be reliable for routine operation.

Full details can be found within the supporting appendices on the Delta e-Sourcing system.

two.2.5) Award criteria

Quality criterion - Name: Quality / Weighting: 60

Cost criterion - Name: Price / Weighting: 40

two.2.6) Estimated value

Value excluding VAT: £300,000

two.2.7) Duration of the contract, framework agreement or dynamic purchasing system

Duration in months

9

This contract is subject to renewal

No

two.2.10) Information about variants

Variants will be accepted: No

two.2.11) Information about options

Options: No

two.2.13) Information about European Union Funds

The procurement is related to a project and/or programme financed by European Union funds: No

two.2.14) Additional information

To respond to this opportunity please click here: https://ukri.delta-esourcing.com/respond/295242HVC4


Section three. Legal, economic, financial and technical information

three.1) Conditions for participation

three.1.2) Economic and financial standing

Selection criteria as stated in the procurement documents

three.1.3) Technical and professional ability

Selection criteria as stated in the procurement documents


Section four. Procedure

four.1) Description

four.1.1) Type of procedure

Open procedure

four.1.8) Information about the Government Procurement Agreement (GPA)

The procurement is covered by the Government Procurement Agreement: Yes

four.2) Administrative information

four.2.2) Time limit for receipt of tenders or requests to participate

Date

5 October 2021

Local time

2:00pm

four.2.4) Languages in which tenders or requests to participate may be submitted

English

four.2.7) Conditions for opening of tenders

Date

5 October 2021

Local time

2:00pm


Section six. Complementary information

six.1) Information about recurrence

This is a recurrent procurement: No

six.3) Additional information

For more information about this opportunity, please visit the Delta eSourcing portal at:

https://ukri.delta-esourcing.com/tenders/UK-UK-Swindon:-Lasers./295242HVC4

To respond to this opportunity, please click here:

https://ukri.delta-esourcing.com/respond/295242HVC4

GO Reference: GO-2021826-PRO-18802742

six.4) Procedures for review

six.4.1) Review body

UK Research and Innovation

Polaris House, North Star Avenue

Swindon

SN2 1FL

Country

United Kingdom