Section one: Contracting authority
one.1) Name and addresses
University of Strathclyde
McCance Building, 16 Richmond Street
Glasgow
G1 1XQ
Telephone
+44 7811592949
Country
United Kingdom
NUTS code
UKM82 - Glasgow City
Internet address(es)
Main address
Buyer's address
https://www.publiccontractsscotland.gov.uk/search/Search_AuthProfile.aspx?ID=AA00113
one.2) Information about joint procurement
The contract is awarded by a central purchasing body
one.3) Communication
The procurement documents are available for unrestricted and full direct access, free of charge, at
Additional information can be obtained from the above-mentioned address
Tenders or requests to participate must be submitted electronically via
Electronic communication requires the use of tools and devices that are not generally available. Unrestricted and full direct access to these tools and devices is possible, free of charge, at
one.4) Type of the contracting authority
Body governed by public law
one.5) Main activity
Education
Section two: Object
two.1) Scope of the procurement
two.1.1) Title
Supply, Delivery and Installation of wafer dicing kit for NMIS
Reference number
UOS-30411-2024
two.1.2) Main CPV code
- 31712330 - Semiconductors
two.1.3) Type of contract
Supplies
two.1.4) Short description
The National Manufacturing Institute Scotland is in the process of expanding its manufacturing capability into the semiconductor advanced packaging area with specific focus on power electronic semiconductors. To support this expansion, NMIS intends to procure equipment that can support a wide variety of power electronic semiconductor designs and packaging requirements. The concept design for the facility will support a publicly funded project which will see the creation of an advanced facility for developing and scaling-up packaging capabilities and includes provision of equipment that is sufficiently flexible to support a wide variety of power electronic semiconductor design and packaging requirements.
two.1.5) Estimated total value
Value excluding VAT: £1,000,000
two.1.6) Information about lots
This contract is divided into lots: Yes
Tenders may be submitted for all lots
two.2) Description
two.2.1) Title
Saw Dicing
Lot No
1
two.2.2) Additional CPV code(s)
- 31712330 - Semiconductors
two.2.3) Place of performance
NUTS codes
- UKM82 - Glasgow City
Main site or place of performance
University of Strathclyde
two.2.4) Description of the procurement
The National Manufacturing Institute Scotland is in the process of expanding its manufacturing capability into the semiconductor advanced packaging area with specific focus on power electronic semiconductors. To support this expansion, NMIS intends to procure equipment that can support a wide variety of power electronic semiconductor designs and packaging requirements. The concept design for the facility will support a publicly funded project which will see the creation of an advanced facility for developing and scaling-up packaging capabilities and includes provision of equipment that is sufficiently flexible to support a wide variety of power electronic semiconductor design and packaging requirements.
The overall scale up manufacturing facility is to be housed at an NMIS site, this sub-section of the facility will be housed in a ISO-7 (previously class 10,000) clean room environment. The equipment will comprise the latest technology in their respective fields. It will be utilized in a range of projects within the Power Electronics industry and will be made available to both academic and industrial partners across the whole of the United Kingdom, including other catapult centres.
The facility will have capability to prepare, dice/cut, bond, interconnect, package, and test semiconductor products that are part of the power electronics sector. These stages will be carried out across dedicated research and development cells.
The University is seeking to establish a contract for wafer dicing equipment and is subsequently tendering the lots outlined below:
Lot 1 – Saw Dicing
two.2.5) Award criteria
Quality criterion - Name: quality / Weighting: 50
Price - Weighting: 50
two.2.7) Duration of the contract, framework agreement or dynamic purchasing system
Duration in months
18
This contract is subject to renewal
No
two.2.10) Information about variants
Variants will be accepted: No
two.2.11) Information about options
Options: Yes
Description of options
The Contracting Authority reserves the right to request additional deliveries by the Successful Tenderer, either intended as partial replacement of suppliers or installations or as extensions of existing supplies and installations.
two.2.13) Information about European Union Funds
The procurement is related to a project and/or programme financed by European Union funds: No
two.2) Description
two.2.1) Title
Laser Dicing
Lot No
2
two.2.2) Additional CPV code(s)
- 31712330 - Semiconductors
two.2.3) Place of performance
NUTS codes
- UKM82 - Glasgow City
two.2.4) Description of the procurement
The National Manufacturing Institute Scotland is in the process of expanding its manufacturing capability into the semiconductor advanced packaging area with specific focus on power electronic semiconductors. To support this expansion, NMIS intends to procure equipment that can support a wide variety of power electronic semiconductor designs and packaging requirements. The concept design for the facility will support a publicly funded project which will see the creation of an advanced facility for developing and scaling-up packaging capabilities and includes provision of equipment that is sufficiently flexible to support a wide variety of power electronic semiconductor design and packaging requirements.
The overall scale up manufacturing facility is to be housed at an NMIS site, this sub-section of the facility will be housed in a ISO-7 (previously class 10,000) clean room environment. The equipment will comprise the latest technology in their respective fields. It will be utilized in a range of projects within the Power Electronics industry and will be made available to both academic and industrial partners across the whole of the United Kingdom, including other catapult centres.
The facility will have capability to prepare, dice/cut, bond, interconnect, package, and test semiconductor products that are part of the power electronics sector. These stages will be carried out across dedicated research and development cells.
The University is seeking to establish a contract for wafer dicing equipment and is subsequently tendering the lots outlined below:
Lot 2 – Laser Dicing
two.2.5) Award criteria
Quality criterion - Name: quality / Weighting: 50
Price - Weighting: 50
two.2.7) Duration of the contract, framework agreement or dynamic purchasing system
Duration in months
18
This contract is subject to renewal
No
two.2.10) Information about variants
Variants will be accepted: No
two.2.11) Information about options
Options: Yes
Description of options
The Contracting Authority reserves the right to request additional deliveries by the Successful Tenderer, either intended as partial replacement of suppliers or installations or as extensions of existing supplies and installations.
two.2.13) Information about European Union Funds
The procurement is related to a project and/or programme financed by European Union funds: No
two.2) Description
two.2.1) Title
Scribe & Break
Lot No
3
two.2.2) Additional CPV code(s)
- 31712330 - Semiconductors
two.2.3) Place of performance
NUTS codes
- UKM82 - Glasgow City
two.2.4) Description of the procurement
The National Manufacturing Institute Scotland is in the process of expanding its manufacturing capability into the semiconductor advanced packaging area with specific focus on power electronic semiconductors. To support this expansion, NMIS intends to procure equipment that can support a wide variety of power electronic semiconductor designs and packaging requirements. The concept design for the facility will support a publicly funded project which will see the creation of an advanced facility for developing and scaling-up packaging capabilities and includes provision of equipment that is sufficiently flexible to support a wide variety of power electronic semiconductor design and packaging requirements.
The overall scale up manufacturing facility is to be housed at an NMIS site, this sub-section of the facility will be housed in a ISO-7 (previously class 10,000) clean room environment. The equipment will comprise the latest technology in their respective fields. It will be utilized in a range of projects within the Power Electronics industry and will be made available to both academic and industrial partners across the whole of the United Kingdom, including other catapult centres.
The facility will have capability to prepare, dice/cut, bond, interconnect, package, and test semiconductor products that are part of the power electronics sector. These stages will be carried out across dedicated research and development cells.
The University is seeking to establish a contract for wafer dicing equipment and is subsequently tendering the lots outlined below:
Lot 3 – Scribe & Break
two.2.5) Award criteria
Quality criterion - Name: quality / Weighting: 50
Price - Weighting: 50
two.2.7) Duration of the contract, framework agreement or dynamic purchasing system
Duration in months
18
This contract is subject to renewal
No
two.2.10) Information about variants
Variants will be accepted: No
two.2.11) Information about options
Options: Yes
Description of options
The Contracting Authority reserves the right to request additional deliveries by the Successful Tenderer, either intended as partial replacement of suppliers or installations or as extensions of existing supplies and installations.
two.2.13) Information about European Union Funds
The procurement is related to a project and/or programme financed by European Union funds: No
Section three. Legal, economic, financial and technical information
three.1) Conditions for participation
three.1.2) Economic and financial standing
List and brief description of selection criteria
4B 1.2 Turnover
Bidders will be required to have the average yearly turnover to participate in the relevant lot (see below) This is to ensure the University is protected from any unforeseen financial risks that may impact the supplier or supply chain.
Lot 1 - GBP 600,000 for the last 3 (three) years
Lot 2 – GBP 2,000,000 for the last 3 (three) years
Lot 3 - GBP 1,600,000 for the last 3 (three) years
Minimum level(s) of standards possibly required
4B.5.1- 4B5.3 Insurances
Insurance requirements are in line with levels identified in the UOS standard Terms and Conditions.
It is a requirement of this contract that bidders can hold or commit to obtain prior to the commencement of any subsequently awarded contract, the types of insurance indicated below:
The Contractor shall maintain in force with reputable insurers
Employer’s (Compulsory) Liability Insurance = GBP 10m
Public and Product Liability Insurance = GBP 10m
Professional Risk Indemnity Insurance = GBP 1m
In respect of any one incident and unlimited as to numbers of claims
three.1.3) Technical and professional ability
List and brief description of selection criteria
4C.1.2 Previous Experience
Bidders will be required to provide three (3) examples that demonstrate that they have the relevant experience to deliver the equipment as stated in the Contract Notice.
Section four. Procedure
four.1) Description
four.1.1) Type of procedure
Open procedure
four.1.8) Information about the Government Procurement Agreement (GPA)
The procurement is covered by the Government Procurement Agreement: Yes
four.2) Administrative information
four.2.2) Time limit for receipt of tenders or requests to participate
Date
22 July 2024
Local time
12:00pm
four.2.4) Languages in which tenders or requests to participate may be submitted
English
four.2.6) Minimum time frame during which the tenderer must maintain the tender
Duration in months: 4 (from the date stated for receipt of tender)
four.2.7) Conditions for opening of tenders
Date
22 July 2024
Local time
12:00pm
Place
University of Strathclyde
Section six. Complementary information
six.1) Information about recurrence
This is a recurrent procurement: No
six.2) Information about electronic workflows
Electronic ordering will be used
Electronic invoicing will be accepted
Electronic payment will be used
six.3) Additional information
The buyer is using PCS-Tender to conduct this ITT exercise. The Project code is 26821. For more information see:
http://www.publiccontractsscotland.gov.uk/info/InfoCentre.aspx?ID=2343
Community benefits are included in this requirement. For more information see: https://www.gov.scot/policies/public-sector-procurement/community-benefits-in-procurement/
A summary of the expected community benefits has been provided as follows:
Please see Procurement documents for full details
The buyer is using PCS-Tender to conduct this ITT exercise. The Project code is 26821. For more information see: http://www.publiccontractsscotland.gov.uk/info/InfoCentre.aspx?ID=2343
Community benefits are included in this requirement. For more information see: https://www.gov.scot/policies/public-sector-procurement/community-benefits-in-procurement/
A summary of the expected community benefits has been provided as follows:
Community benefits are included in this requirement. For more information see: https://www.gov.scot/policies/public-sector-procurement/community-benefits-in-procurement/
A summary of the expected community benefits has been provided as follows:
Please see Procurement documents for full details
(SC Ref:769827)
six.4) Procedures for review
six.4.1) Review body
Glasgow Sheriff Court
Glasgow
Country
United Kingdom
six.4.3) Review procedure
Precise information on deadline(s) for review procedures
An economic operator that suffers, or risks suffering, loss or damage attributable to a breach of duty under the Public Contracts (Scotland) Regulations
2015(SSI2015/446) (as amended) may bring proceedings in the Sheriff Court or the Court of Session.