Section one: Contracting authority
one.1) Name and addresses
National Physical Laboratory
Hampton Road
Teddington
TW11 0LW
Country
United Kingdom
NUTS code
UK - United Kingdom
Internet address(es)
Main address
one.3) Communication
Additional information can be obtained from the above-mentioned address
one.4) Type of the contracting authority
Body governed by public law
one.5) Main activity
Other activity
Scientific research
Section two: Object
two.1) Scope of the procurement
two.1.1) Title
Roundness High Accuracy (Dim)
two.1.2) Main CPV code
- 38000000 - Laboratory, optical and precision equipments (excl. glasses)
two.1.3) Type of contract
Supplies
two.1.4) Short description
The National Physical Laboratory [NPL] requirement is for a high accuracy roundness measurement system with nanometre resolution for the calibration of hemispheres. The system should incorporate a rotary stage to allow for multi-orientation spindle/component error separation. Data should be able to be collected at user programable rotations and stored as an ASCII file. The work table diameter shall be approximately 300 mm in diameter and be able to accommodate parts of the order of 500 mm in height. The system should be programmable to allow automatic measurement sequences.
two.1.6) Information about lots
This contract is divided into lots: No
two.2) Description
two.2.2) Additional CPV code(s)
- 38000000 - Laboratory, optical and precision equipments (excl. glasses)
two.2.3) Place of performance
NUTS codes
- UK - United Kingdom
Main site or place of performance
National Physical Laboratory, Hampton Road, Teddington, TW11 0LW
two.2.4) Description of the procurement
The National Physical Laboratory [NPL] requirement is for a high accuracy roundness measurement system with nanometre resolution for the calibration of hemispheres. The system should incorporate a rotary stage to allow for multi-orientation spindle/component error separation. Data should be able to be collected at user programable rotations and stored as an ASCII file. The work table diameter shall be approximately 300 mm in diameter and be able to accommodate parts of the order of 500 mm in height. The system should be programmable to allow automatic measurement sequences.
two.3) Estimated date of publication of contract notice
4 July 2021
Section four. Procedure
four.1) Description
four.1.8) Information about the Government Procurement Agreement (GPA)
The procurement is covered by the Government Procurement Agreement: Yes