Section one: Contracting authority
one.1) Name and addresses
UNIVERSITY OF BIRMINGHAM
Chancellors Close
BIRMINGHAM
B152TT
Contact
Susanna Ting
Country
United Kingdom
NUTS code
UKG31 - Birmingham
Internet address(es)
Main address
www.birmingham.ac.uk/index.aspx
one.3) Communication
The procurement documents are available for unrestricted and full direct access, free of charge, at
www.in-tendhost.com/universityofbirmingham
Additional information can be obtained from the above-mentioned address
Tenders or requests to participate must be submitted electronically via
www.in-tendhost.com/universityofbirmingham
one.4) Type of the contracting authority
Body governed by public law
one.5) Main activity
Education
Section two: Object
two.1) Scope of the procurement
two.1.1) Title
Supply and Installation of an Environmental Thermal Mechanical Test System
Reference number
SC10029/22
two.1.2) Main CPV code
- 38000000 - Laboratory, optical and precision equipments (excl. glasses)
two.1.3) Type of contract
Supplies
two.1.4) Short description
The University of Birmingham invites tenders for supply of an environmental thermal mechanical test system for in-situ irradiation. The University operates an MC40 Cyclotron and a neutron beam facility is currently being built. The MC40 Cyclotron can produce the proton beam energies in the range of 3~38 MeV.
To support the nuclear research in the UK, the University has been awarded a project by EPSRC to develop a system which will enable the mechanical testing of materials under vacuum (and potentially other environments), and with the capability of in-situ irradiation.
The proposed system will have a digital control system to deliver custom deformation waveforms and cooled grips for temperature control. The system will offer the capability of vacuum (and potentially other environments), high temperature, mechanical testing with in-situ irradiation capability and integrated with Birmingham irradiation facility. Ultimately the system will enable the evaluation of the thermal-mechanical properties at application-relevant temperature with simultaneous irradiation of a range of nuclear fission and fusion materials.
This project may be funded by the European Regional Development Fund (ERDF) or;
- European Structural and Investment Fund (ESIF) or;
- Research Councils UK (RCUK), the strategic partnership of the UK's seven Research Councils.
two.1.5) Estimated total value
Value excluding VAT: £300,000
two.1.6) Information about lots
This contract is divided into lots: No
two.2) Description
two.2.3) Place of performance
NUTS codes
- UKG31 - Birmingham
two.2.4) Description of the procurement
The University of Birmingham invites tenders for the supply of a thermal mechanical test system for in-situ irradiation. The University operates an MC40 Cyclotron and a neutron beam facility is currently being built. The MC40 Cyclotron can produce the proton beam energies in the range of 3~38 MeV. The proposed system will be integrated to the Cyclotron and/or the neutron beams for mechanical testing under elevated temperatures, with in-situ irradiation.
The system needs to be interface with the irradiation beams at the University of Birmingham. Thus, it is expected that the system should be mobile and/or adjustable in terms of the positioning.
The system shall be able to operate under different environmental conditions, such as air, vacuum or gaseous.
The system shall enable the testing of flat samples, but the capability of testing samples of other geometries (such as cylindrical) is highly desirable.
The system shall be able to accurately measure and control the temperate of the testing sample. The maximum testing sample temperature equal to, or greater than, 1200 oC is needed. The capability of testing at temperatures lower than the ambient temperature is a plus.
The system shall be able to accurately measure and control the displacement/strain on the testing sample. The capability of remote strain measurement such as digital image correlation is highly desirable.
The system shall be able to provide the maximum load of 5 kN or above. It is highly desirable to have exchangeable load-cells with different maximum loads. The system shall have a digital control system to deliver custom deformation waveforms (e.g. static loading, creep, fatigue including TMF etc), as well as cooled (using liquid nitrogen/water) grips for temperature control (essential for samples subjected to high beam currents).
two.2.5) Award criteria
Quality criterion - Name: Compliance to the Specifications / Weighting: 40
Quality criterion - Name: After Sales and Technical back up / Weighting: 10
Quality criterion - Name: Delivery and Training / Weighting: 10
Quality criterion - Name: Sustainability and Environmental / Weighting: 5
Quality criterion - Name: Standard Supplier Questionnaire (SQ) / Weighting: 10
Price - Weighting: 25
two.2.7) Duration of the contract, framework agreement or dynamic purchasing system
End date
31 October 2022
This contract is subject to renewal
No
two.2.10) Information about variants
Variants will be accepted: No
two.2.11) Information about options
Options: No
Section four. Procedure
four.1) Description
four.1.1) Type of procedure
Open procedure
four.1.8) Information about the Government Procurement Agreement (GPA)
The procurement is covered by the Government Procurement Agreement: Yes
four.2) Administrative information
four.2.2) Time limit for receipt of tenders or requests to participate
Date
11 April 2022
Local time
11:59am
four.2.4) Languages in which tenders or requests to participate may be submitted
English
four.2.7) Conditions for opening of tenders
Date
11 April 2022
Local time
12:00pm
Section six. Complementary information
six.1) Information about recurrence
This is a recurrent procurement: No
six.4) Procedures for review
six.4.1) Review body
The University of Birmingham
Edgbaston
Birmingham
B15 2TT
Country
United Kingdom