Section one: Contracting authority
one.1) Name and addresses
Diamond Light Source Ltd
ADDRESS
Didcot
OX11 0ED
Contact
Debbie Pryor
Telephone
+44 1235567575
Country
United Kingdom
NUTS code
UKJ14 - Oxfordshire
Internet address(es)
Main address
one.3) Communication
The procurement documents are available for unrestricted and full direct access, free of charge, at
https://www.diamondtenders@diamond.ac.uk
Additional information can be obtained from the above-mentioned address
Tenders or requests to participate must be submitted electronically via
https://www.diamondtenders@diamond.ac.uk
Tenders or requests to participate must be submitted to the above-mentioned address
one.4) Type of the contracting authority
Body governed by public law
one.5) Main activity
Other activity
Scientific Research
Section two: Object
two.1) Scope of the procurement
two.1.1) Title
DLSITT0426A Supply of a Motion Control Platform
Reference number
DLSITT0426A
two.1.2) Main CPV code
- 31000000 - Electrical machinery, apparatus, equipment and consumables; lighting
two.1.3) Type of contract
Supplies
two.1.4) Short description
DLS are looking for a replacement standard Motion Control Platform capable of driving a range of prevision motors and providing high levels of accuracy, repeatability and response. The controller must be able to perform control of complex motion including multi axis coordinated movement. It is expected that the solution would be used to provide control for 1000 axes of motions on a range of projects. After an initial evaluation, DLS will purchase and evaluate units from those best suited and once satisfied with the performance select a preferred supplier. DLS will then purchase units to control several hundred axes a year from early 2022 for a minimum of 5 years.
two.1.6) Information about lots
This contract is divided into lots: No
two.2) Description
two.2.3) Place of performance
NUTS codes
- UKJ14 - Oxfordshire
two.2.4) Description of the procurement
The scope of the contract is to design, manufacture, supply and deliver a high density, highly flexible, ideally integrated Motion Controller and amplifier solution. It must be capable of providing control for a multitude of different types of Stepper, Servo, Voice Coil and Piezo motors and therefore interface to suitable encoders to facilitate closed loop control. The target solution drives a block of 8 motion axes from a single compact, rack-mounted unit, or many motors if distributed. For the purpose of this tender document, it can be assumed that 70% of the axes under control will be stepper motors, 10% servo motors and the remaining 20% external amplifier driven devices. Of these axes 80% can be considered to require either synchronisation with other axes on the same (highly desirable) or separate controller and or potentially operate with Kinematic routines. The motion controller should either be housed within the amplifier units or be a separate card to be located within a suitable modular style system attached by 1 or 2 cables to the drive amplifier unit. For an integrated amplifier and controller, the interface to our control and data acquisition system (EPICS) will be an Ethernet interface.
The system could take the form of a standard off the shelf offering or 'a special' in a suitable enclosure with back panel connectors. If this approach is taken it must conform to DLS Electrical and connector standards. For this reason, it is anticipated that solutions that comprise a standard system modified in some way to meet the DLS connector standard will be given an advantageous cost weighting to compensate for the extra cost of packaging and connectors.
The motion controller should be fully supported within the EPICS software framework.
two.2.5) Award criteria
Quality criterion - Name: Technical Quality / Weighting: 25
Quality criterion - Name: Experience & Capacity / Weighting: 20
Quality criterion - Name: Acceptance of Diamond Terms & Conditions / Weighting: 3
Quality criterion - Name: Currency / Weighting: 3
Quality criterion - Name: Delivery / Weighting: 4
Price - Weighting: 45
two.2.7) Duration of the contract, framework agreement or dynamic purchasing system
Start date
28 February 2022
End date
22 April 2027
This contract is subject to renewal
Yes
Description of renewals
It is expected that this contract will run for a period of 5 years with the view to being extended for a further 5 years before being re-tendered. The minimum number of axes purchased will exceed 600 and is likely to reach 1500 (to cover obsolescence & breakdowns) over the full 10-year period.
two.2.10) Information about variants
Variants will be accepted: No
two.2.11) Information about options
Options: Yes
Description of options
The specification describes an extremely versatile system, and it is fully understood that a single system may not meet all requirements. If it is more cost effective, then a solution which achieves >80% of our requirements will be selected and applications requirements that cannot be achieved on the platform will be assessed on a case-by-case basis and the most suitable controller purchased. (see Section 2.3 of the specification).
Section four. Procedure
four.1) Description
four.1.1) Type of procedure
Open procedure
four.1.8) Information about the Government Procurement Agreement (GPA)
The procurement is covered by the Government Procurement Agreement: Yes
four.2) Administrative information
four.2.1) Previous publication concerning this procedure
Notice number: 2021/S 000-016918
four.2.2) Time limit for receipt of tenders or requests to participate
Date
14 February 2022
Local time
12:00pm
four.2.4) Languages in which tenders or requests to participate may be submitted
English
four.2.7) Conditions for opening of tenders
Date
14 February 2022
Local time
12:30pm
Section six. Complementary information
six.1) Information about recurrence
This is a recurrent procurement: No
six.4) Procedures for review
six.4.1) Review body
Diamond Light Source
Didcot
OX11 0ED
Country
United Kingdom