Section one: Contracting authority
one.1) Name and addresses
UK Research & Innovation
Polaris House, North Star Avenue
Swindon
SN2 1FL
Contact
STFC Procurement
Telephone
+44 1235446553
Country
United Kingdom
NUTS code
UKK14 - Swindon
Internet address(es)
Main address
one.2) Information about joint procurement
The contract is awarded by a central purchasing body
one.3) Communication
The procurement documents are available for unrestricted and full direct access, free of charge, at
https://www.delta-esourcing.com/tenders/UK-UK-Swindon:-Lasers./H5V9UP64NY
Additional information can be obtained from the above-mentioned address
Tenders or requests to participate must be submitted electronically via
https://www.delta-esourcing.com/tenders/UK-UK-Swindon:-Lasers./H5V9UP64NY
Tenders or requests to participate must be submitted to the above-mentioned address
one.4) Type of the contracting authority
Body governed by public law
one.5) Main activity
Other activity
Research and Innovation
Section two: Object
two.1) Scope of the procurement
two.1.1) Title
UKRI-1167 - Cryogenic Cooling System for a High-Power Laser
Reference number
UKRI-1167
two.1.2) Main CPV code
- 38636100 - Lasers
two.1.3) Type of contract
Supplies
two.1.4) Short description
Proposals are sought by the Science and Technology Facilities Council (STFC, part of UK Research and Innovation, UKRI) for a cryogenic cooling system for a high-power laser. STFC is building an advanced Yb:YAG laser system delivering pulse energies in excess of 10 J at 100 Hz repetition rate. The system will be built, tested, and operated at the Rutherford Appleton Laboratory.
two.1.5) Estimated total value
Value excluding VAT: £425,000
two.1.6) Information about lots
This contract is divided into lots: No
two.2) Description
two.2.3) Place of performance
NUTS codes
- UKJ14 - Oxfordshire
Main site or place of performance
Oxfordshire
two.2.4) Description of the procurement
The Science and Technology Facilities Council (STFC) is building an advanced Yb:YAG laser system delivering pulse energies in excess of 10 J at 100 Hz repetition rate. This system will be built, tested, and operated at the Rutherford Appleton Laboratory, UK. This specification describes the requirements for a cryogenic cooling system to control and maintain the temperature of the main laser amplifier head.
1.1Scope of contract
This specification covers the supply of a cooling system, in the following also called the System comprising of:
•The cooling system itself (based on a sealed helium coolant loop that is cooled using a liquid nitrogen (LN2) supply).
•An EPICS compatible control system.
•All cabling and piping required to interface points specified herein.
•Factory demonstration of the System demonstrating the full performance specified herein
•Attendance at STFC’s RAL site to confirm the adequacy of the installation and to set up and demonstrate the plant, reconfirming the performance of the equipment to this specification.
•Reports and documentation as stated herein.
•Full technical construction file and certification, in reproducible form, attesting to compliance with European Trading Regulations (CE marking).
•CE declaration of conformity.
•Certificate of conformity to this specification.
•Operating and maintenance manuals in English (UK).
•Specialist plant and equipment to support assembly, testing and installation, including blanks and seals for all flanges.
•Provision of cryostat and transfer line support and adjustment system.
•Flexible vacuum jacketed supply and exhaust lines.
This cooling system will be supplied and delivered to STFC where it will be integrated with other hardware as part of a project to design and construct an advanced laser system
All equipment supplied must be suitable for operation in the UK. All equipment supplied must meet European Regulations and, as appropriate, be CE marked.
The full specification and requirements can be found within the Delta eSourcing Portal, mentioned below;
UKRI will be using the Delta eSourcing Portal for this procurement. To register on the Delta eSourcing portal please use the link https://www.delta-esourcing.com/ and follow the instructions to register. If you are already registered on the Delta eSourcing Portal and wish to participate in this procurement, please use the link provided in this Notice, and then follow the instructions to ‘Login’. Once you are logged into the system you will be able to link yourself into this procurement using the Access Code https://www.delta-esourcing.com/respond/H5V9UP64NY. As a user of the Delta eSourcing Portal you will have access to the Delta messaging service which facilitates all messages sent to you and from you in relation to any specific tender event. Please note it is your responsibility to access these messages on a regular basis to ensure you have sight of all relevant information applicable to this opportunity. Please ensure you review all attached information to ensure a full understanding of this requirement. All attachments can be found with the Document Uploads tab within the Delta eSourcing Portal.
The contracting authority expressly reserves the right:
i. not to award any contract as a result of the procurement process commenced by publication of this notice; and
ii.to make whatever changes it may see fit to the content and structure of the procurement; and in no circumstances will the contracting authority be liable for any costs incurred by any supplier. If the contracting authority decides to enter into a contract with the successful supplier, this does not mean that there is any guarantee of subsequent contracts being awarded. Any expenditure, work or effort undertaken prior to contract award is accordingly a matter solely for the commercial judgement of bidders.
two.2.5) Award criteria
Quality criterion - Name: Quality / Weighting: 70
Cost criterion - Name: Price / Weighting: 30
two.2.6) Estimated value
Value excluding VAT: £425,000
two.2.7) Duration of the contract, framework agreement or dynamic purchasing system
Duration in months
12
This contract is subject to renewal
No
two.2.10) Information about variants
Variants will be accepted: No
two.2.11) Information about options
Options: No
two.2.13) Information about European Union Funds
The procurement is related to a project and/or programme financed by European Union funds: No
Section three. Legal, economic, financial and technical information
three.1) Conditions for participation
three.1.2) Economic and financial standing
Selection criteria as stated in the procurement documents
three.1.3) Technical and professional ability
Selection criteria as stated in the procurement documents
Section four. Procedure
four.1) Description
four.1.1) Type of procedure
Open procedure
four.1.8) Information about the Government Procurement Agreement (GPA)
The procurement is covered by the Government Procurement Agreement: Yes
four.2) Administrative information
four.2.2) Time limit for receipt of tenders or requests to participate
Date
27 April 2021
Local time
2:00pm
four.2.4) Languages in which tenders or requests to participate may be submitted
English
four.2.7) Conditions for opening of tenders
Date
27 April 2021
Local time
2:00pm
Section six. Complementary information
six.1) Information about recurrence
This is a recurrent procurement: No
six.3) Additional information
The contracting authority considers that this contract may be suitable for economic operators that are small or medium enterprises (SMEs). However, any selection of tenderers will be based solely on the criteria set out for the procurement.
For more information about this opportunity, please visit the Delta eSourcing portal at:
https://ukri.delta-esourcing.com/tenders/UK-UK-Swindon:-Lasers./H5V9UP64NY
To respond to this opportunity, please click here:
https://ukri.delta-esourcing.com/respond/H5V9UP64NY
GO Reference: GO-2021317-PRO-17945108
six.4) Procedures for review
six.4.1) Review body
UK Research and Innovation
Polaris House, North Star Avenue
Swindon
SN2 1FL
Country
United Kingdom